Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 228KD236A-P305 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
rectangular
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
2.8590in. and 2.8910in.
The style designation indicating the configuration that most nearly corresponds to the shape of the center hole.
round w/keyways
An overall measurement of the smallest dimension of an item,in distinction from length or width.
0.3040in. and 0.3060in.
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.
1.8900in. and 1.9000in.
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
40.0 rockwell c and 45.0 rockwell c
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
washer, thrust m.s. 4th speed (selective)
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
part no. rubber stamped on part; part has 4 sets of 3 teeth equally spaced on inner dia of bearing
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
sae J403 no. 1074 assn std all material responses
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
round
Answers.
Round
Steel
2.8590 inches minimum and 2.8910 inches maximum
Schedule B number: 8482105008
Thrust ball bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
NSN 3120-01-552-0976 BEARING,WASHER,THRUST
round part no. rubber stamped on part; part has 4 sets of 3 teeth equally spaced on inner dia of bearing washer, thrust m.s. 4th speed (selective) 2.8590" outside diameter
- NIIN
- 015520976
- NIIN Date
- 06/05/07
- Schedule B
- 8482105008
- Name Code
- 13211
- FIIG
- A045A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Australia
Availability for 228KD236A-P305 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
228KD236A-P305 / Bearing,washer,thrustWhat is the formal definition of this item?
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.
