Serving our customers with quality and safety first.
convex
4.0257in. and 4.0317in.
round
1.1280in. and 1.1370in.
0.0580in. and 0.0620in.
4.0257in. and 4.0317in.
3.9677in. and 3.9697in.
square first inside corner
square second inside corner
60.0 rockwell c and 65.0 rockwell c
steel
ground
round
1EA
Round
Steel
4.0257 inches minimum and 4.0317 inches maximum
Schedule B number: 8482105008
nmfc 114850
Thrust ball bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
round 4.0257" outside diameter
1. | 2102711 | Cage 7X677 |
2. | 1829Q95 | Cage 09136 |
3. | 1829Q95 | Cage 78500 |
4. | 398GX9 | Cage 45152 |
5. | 4A1829Q95 | Cage 23382 |
6. | 1829Q95 | Cage 27315 |
7. | 11A9652 | Cage 95201 |
8. | 1229D888 | Cage 8E499 |
9. | 1020D5 | Cage 56442 |
10. | 1238D5 | Cage 56442 |
11. | 36619M | Cage 56442 |
12. | BB26222 | Cage 56442 |
13. | 1829Q95 | Cage 19107 |
14. | 1229D888 | Cage 59690 |
15. | 1829Q95 | Cage 65282 |
16. | 3B6269 | Cage 65282 |
17. | 7B5212 | Cage 65282 |
18. | 109393 | Cage 29510 |
19. | 2102711 | Cage 24617 |
20. | 398G9 | Cage 45152 |
21. | 4ZTD0751 | Cage 62265 |
22. | 1229D888 | Cage 78500 |
23. | 398GX9 | Cage 75Q65 |
Nothing similar to this part number was found in our inventory
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.