Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. L44000-11-4 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.2000in. first ⁓13/64"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
4.3650in. and 4.3850in. ⁓4-25/64"
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
2.4700in. and 2.5300in.
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.
2.0020in. and 2.0030in.
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.
3.0900in. and 3.1500in.
A measurement taken at right angles to the length of a flange,in distinction from thickness.
0.1150in. and 0.1350in.
The style designation indicating the configuration that most nearly corresponds to the means whereby the lubricant is set into the item.
grooved circular
The physical configuration of the corner.
chamfered inside right corner
The physical configuration of the corner.
chamfered inside left corner
The physical configuration of the corner.
square left flange body corner
The physical configuration of the corner.
square left flange outside right corner
The physical configuration of the corner.
square outside left corner
The physical configuration of the corner.
square outside right corner
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches left end surface of body and flange
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches outside diameter surface of flange
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches right end surface of body
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches right end surface of left flange
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
63.0 microinches inside diameter surface of body
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.
2 hole
Indicates the location and number of grooves on the surface of the item.
5 internal
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
thd 2-1/8-16 un 3b opposite end of flange 0.6250 in.lg, 2 holes equallyspaced 0.2000 in. w, 0.3200 in. lg located 0.1550 in. from right end surface
The chemical compound or mechanical mixture properties of which the item is fabricated.
glass fiber outer layer
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel inner layer or steel comp 4340 inner layer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-S-763 fed spec 1st material response inner layer or 17-4Ph, fscm 03876 mfr ref 1st material response inner layer or 66 fed std 2nd material response inner layer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
type 4B2, fscm 99384 mfr ref single material response outer layer
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate inner layer or cadmium inner layer
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-S-5002 mil spec 1st treatment response inner layer or QQ-P-416, cl 2 fed spec 2nd treatment response inner layer
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
22c solid, external flange one end
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-I-6866 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) . and 81349-MIL-I-6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Answers.
1EA
22c solid, external flange one end
Steel inner layer or steel comp 4340 inner layer
Glass fiber outer layer
0.2000 inches first
Schedule B number: 8482997060
nmfc 114850
Parts, for cylindrical roller bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
NSN 3120-00-834-2193 BUSHING,SLEEVE
22c solid, external flange one end passivate inner layer or cadmium inner layer surface treated thd 2-1/8-16 un 3b opposite end of flange 0.6250 in.lg, 2 holes equallyspaced 0.2000 in. w, 0.3200 in. lg located 0.1550 in. from right end surface 4.3650" overall length 0.2000" first hole diameter
- NIIN
- 008342193
- NIIN Date
- 04/29/72
- Schedule B
- 8482997060
- Name Code
- 13206
- FIIG
- A045A0
- Item Weight
- 1.200lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $1,442.00 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Spain
- - Australia
- - Canada
- - United Kingdom
- - Netherlands
Availability for L44000-11-4 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- 65.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114850 BEARING/BUSHING O/T BALL/ROLLER I/S
- UFC (universal freight code)
- 58880
Similar by Design Other bushings with similar characteristics
Nothing similar to this part number was found in our inventory
L44000-11-4 / Bushing,sleeveWhat is the formal definition of this item?
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. the overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. for items made of rubber, see bushing, nonmetallic. see also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. excludes bushing, drill, jig.
