Serving our customers with quality and safety first.
1.1600in. and 1.1800in. ⁓1-3/16"
2.2470in. and 2.2490in.
2.1040in. and 2.1060in.
2.8400in. and 2.8800in.
2.3980in. and 2.4000in.
0.4010in.
0.0800in. and 0.1000in.
chamfered inside right corner
chamfered outside left corner
square left flange body corner
square inside left corner
square left flange outside right corner
square outside right corner
square right flange body corner
square right flange outside left corner
63.0 microinches outside diameter surface of body
63.0 microinches left end surface of right flange
63.0 microinches right end surface of left flange
63.0 microinches outside diameter surface of right flange
od surf. radius porm 0.005 to 0.015 in. to flanges; from od surf. porm 0.136 to 0.142 in. raise to dia of small flange 0.15 in. and .035 in. r to large flange; large flange 1/2 porm 1.42 to 1.44 r; other 1/2 rectangular opposite sides flush w radius; flat side porm 1.28 to 1.30 in. from center of bore; also 2holes porm 0.233 to 0.239 dia on 1.5052 in. bc 2.25 in. apart; large flange is largest od flange
steel
ams 5645 assn std single material response
18c solid, external flanges both ends
1EA
18c solid, external flanges both ends
Steel
Schedule B number: 8482997060
nmfc 114800
Parts, for cylindrical roller bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
18c solid, external flanges both ends od surf. radius porm 0.005 to 0.015 in. to flanges; from od surf. porm 0.136 to 0.142 in. raise to dia of small flange 0.15 in. 1.1600" overall length
1. | 9601M58P02 | Cage 07482 |
2. | 9601M58P03 | Cage 07482 |
Nothing similar to this part number was found in our inventory
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. the overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. for items made of rubber, see bushing, nonmetallic. see also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. excludes bushing, drill, jig.