Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 9-61961-7 specification
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.0800in. ⁓1-3/32"
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
6.3832in. and 6.3853in.
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.
5.5600in.
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.
7.2500in.
The national stock number or the identification information of the end equipment for which the item is a part.
C-135 aircraft, BUSHING-Main landing gear fwd trunnion
A measurement taken at right angles to the length of a flange,in distinction from thickness.
0.1650in. and 0.1750in.
The physical configuration of the corner.
chamfered inside right corner
The physical configuration of the corner.
chamfered inside left corner
The physical configuration of the corner.
chamfered outside right corner
The physical configuration of the corner.
round left flange body corner
The physical configuration of the corner.
square left flange outside right corner
The physical configuration of the corner.
square outside left corner
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches outside diameter surface of body
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches left end surface of body and flange
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches outside diameter surface of flange
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches right end surface of body
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches right end surface of left flange
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
63.0 microinches inside diameter surface of body
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
bushing aft 3rd over
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy 630 or copper alloy 954 or copper alloy 955
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-B-6946 cold drawn mil spec single material response or QQ-B-671 class 3 ht tr fed spec single material response or QQ-B-671 class 4 ht tr fed spec single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium left end surface of body and flange or zinc left end surface of body and flange and nickel left end surface of body and flange
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium outside diameter surface of flange or zinc outside diameter surface of flange and nickel outside diameter surface of flange
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium outside diameter surface of body or zinc outside diameter surface of body and nickel outside diameter surface of body
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium right end surface of body or zinc right end surface of body and nickel right end surface of body
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium right end surface of left flange or zinc right end surface of left flange and nickel right end surface of left flange
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
AMS-QQ-PP-416, type ii, class 3 (preferred) assn std single treatment response left end surface of body and flange or ams 2417, type 1 or type 2 assn std single treatment response left end surface of body and flange or ams 2451/4 or 3 assn std single treatment response left end surface of body and flange or ams 2451/9, type 1 or type 2 assn std single treatment response left end surface of body and flange
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
AMS-QQ-PP-416, type ii, class 3 (preferred) assn std single treatment response outside diameter surface of body or ams 2417, type 1 or type 2 assn std single treatment response outside diameter surface of body or ams 2451/4 or 3 assn std 1st treatment response outside diameter surface of body or ams 2451/9 type 1 or type 2 assn std single treatment response outside diameter surface of body
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
AMS-QQ-PP-416, type ii, class 3 (preferred) assn std single treatment response right end surface of left flange or ams 2417, type 1 or type 2 assn std single treatment response right end surface of left flange or ams 2451/4 or 3 assn std single treatment response right end surface of left flange or ams 2451/9, type 1 or type 2 assn std single treatment response right end surface of left flange
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
AMS-QQ-PP-416, type ii, class 3 (preffered) assn std single treatment response right end surface of body or ams 2417, type 1 or type 2 assn std single treatment response right end surface of body or AMS-2451/4 or 3 assn std single treatment response right end surface of body or ams 2451/9, type 1 or type 2 assn std single treatment response right end surface of body
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
AMS-QQ-PP-446, type ii, class 3 (preferred) assn std single treatment response outside diameter surface of flange or ams 2417, type 1 or type 2 assn std single treatment response outside diameter surface of flange or ams 2451/4 or 3 assn std single treatment response outside diameter surface of flange or ams 2451/9, type 1 or type 2 assn std single treatment response outside diameter surface of flange
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
22C-3 solid, external flange one end, internal flange at both ends
Answers.
1EA
22c-3 solid, external flange one end, internal flange at both ends
Copper alloy 630 or copper alloy 954 or copper alloy 955
Schedule B number: 8482997060
nmfc 114820
Parts, for cylindrical roller bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
NSN 3120-01-560-5957 BUSHING,SLEEVE
Used on c-135 aircraft, bushing-main landing gear fwd trunnion. 22c-3 solid, external flange one end, internal flange at both ends cadmium right end surface of left flange or zinc right end surface of left flange surface treated bushing aft 3rd over 1.0800" overall length
- NIIN
- 015605957
- NIIN Date
- 02/05/08
- Schedule B
- 8482997060
- Name Code
- 13206
- FIIG
- A045A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $1,240.75 EA
- DEMIL / ITAR
- USML/ITAR controlled item (Code: B)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
Availability for 9-61961-7 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other bushings with similar characteristics
Nothing similar to this part number was found in our inventory
9-61961-7 / Bushing,sleeveWhat is the formal definition of this item?
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. the overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. for items made of rubber, see bushing, nonmetallic. see also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. excludes bushing, drill, jig.
