Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 3-56096-2 specification
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
0.4990in. and 0.5000in. ⁓1/2"
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
0.6910in. and 0.6915in.
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.
0.4400in.
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.
0.8500in.
A measurement taken at right angles to the length of a flange,in distinction from thickness.
0.0690in. and 0.0700in.
The physical configuration of the corner.
square all corners
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
40.0 microinches right end surface of body
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
used on FOLLOW-Up linkage of stabilizer on B-52H
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-B-6946 mil spec single material response
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
22c solid, external flange one end
Answers.
1EA
22c solid, external flange one end
Copper alloy
Schedule B number: 8482997060
nmfc 011760
Parts, for cylindrical roller bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
NSN 3120-01-380-0620 BUSHING,SLEEVE
22c solid, external flange one end used on follow-up linkage of stabilizer on b-52h 0.4990" overall length
- NIIN
- 013800620
- NIIN Date
- 09/13/93
- Schedule B
- 8482997060
- Name Code
- 13206
- FIIG
- A045A0
- QUP
- 1
- Historical Price
- $44.73 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
Availability for 3-56096-2 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 200.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Aircraft parts, to include test/tool sets and equipment (other than armament systems)
- NMFC (national motor freight code)
- 011760 AIRCRAFT/AIRCRAFT PART VIZ:
- UFC (universal freight code)
- 04705
Similar by Design Other bushings with similar characteristics
Nothing similar to this part number was found in our inventory
3-56096-2 / Bushing,sleeveWhat is the formal definition of this item?
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. the overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. for items made of rubber, see bushing, nonmetallic. see also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. excludes bushing, drill, jig.
