Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 12L105-7 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.0620in. first ⁓1/16"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.1270in. and 1.1350in. ⁓1-9/64"
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
1.3145in. and 1.3151in.
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.
1.1360in. and 1.1367in.
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.
1.6150in. and 1.6350in.
A measurement taken at right angles to the length of a flange,in distinction from thickness.
0.0570in. and 0.0600in.
The style designation indicating the configuration that most nearly corresponds to the means whereby the lubricant is set into the item.
grooved circular
The physical configuration of the corner.
square inside right corner
The physical configuration of the corner.
square inside left corner
The physical configuration of the corner.
square outside left corner
The physical configuration of the corner.
square left flange body corner
The physical configuration of the corner.
square left flange outside right corner
The physical configuration of the corner.
square outside right corner
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.
4 hole
Indicates the location and number of grooves on the surface of the item.
1 external
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
solid, external flange one end
Answers.
Solid, external flange one end
0.0620 inches first
Schedule B number: 8482997060
nmfc 114870
Parts, for cylindrical roller bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
NSN 3120-00-967-4055 BUSHING,SLEEVE
solid, external flange one end 1.1270" overall length 0.0620" first hole diameter
- NIIN
- 009674055
- NIIN Date
- 06/08/66
- Schedule B
- 8482997060
- Name Code
- 13206
- FIIG
- A045A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Availability for 12L105-7 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114870 BEARING/BUSHING METAL
- UFC (universal freight code)
- 58890
Similar by Design Other bushings with similar characteristics
Nothing similar to this part number was found in our inventory
12L105-7 / Bushing,sleeveWhat is the formal definition of this item?
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. the overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. for items made of rubber, see bushing, nonmetallic. see also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. excludes bushing, drill, jig.
