Serving our customers with quality and safety first.
4.2070in. and 4.2270in. ⁓4-15/64"
0.8740in. and 0.8745in.
0.5820in. and 0.5870in.
0.0700in. and 0.0800in.
0.2550in. and 0.2750in.
0.4025in. and 0.4525in.
0.0850in. and 0.1450in.
chamfered inside right corner
chamfered left flange outside right corner
chamfered outside right corner
round left flange body corner
square inside left corner
square outside left corner
32.0 microinches outside diameter surface of body
50.0 microinches outside diameter surface of flange
50.0 microinches right end surface of body
50.0 microinches right end surface of left flange
50.0 microinches inside diameter surface of body
50.0 microinches left end surface of body and flange
flatted flange, 0.625 in. from center of flange to edge of flat, 0.560 in. radius of flange
steel or steel comp H11
JH153, ty H11, fscm 81205 mfr ref 1st material response or ams 6487 mfr ref 2nd material response
chromate zinc inside diameter surface of body
chromium left end surface of body and flange
chromium outside diameter surface of body
chromium outside diameter surface of flange
chromium right end surface of body
chromium right end surface of left flange
MIL-C-16173B mil spec single treatment response inside diameter surface of body
QQ-C-320 fed spec single treatment response outside diameter surface of body
QQ-C-320 fed spec single treatment response left end surface of body and flange
QQ-C-320 fed spec single treatment response outside diameter surface of flange
QQ-C-320 fed spec single treatment response right end surface of body
QQ-C-320 fed spec single treatment response right end surface of left flange
22C-2 solid, external flange one end, interior flange (s) not located at either end
81349-MIL-I-6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
1EA
22c-2 solid, external flange one end, interior flange(s) not located at either end
Steel or steel comp h11
Schedule B number: 8482997060
nmfc 114850
Parts, for cylindrical roller bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
22c-2 solid, external flange one end, interior flange (s) not located at either end chromium right end surface of left flange surface treated flatted flange, 0.625 in. from center of flange to edge of flat, 0.560 in. radius of flange 4.2070" overall length
Nothing similar to this part number was found in our inventory
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. the overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. for items made of rubber, see bushing, nonmetallic. see also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. excludes bushing, drill, jig.