Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. X2527 AND X2528 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.3125in. first ⁓21/64"
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.3930in. second and 0.3950in. second ⁓13/32"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
3.4790in. and 3.4850in. ⁓3-1/2"
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.
5.1200in. and 5.1300in.
A measurement taken at right angles to the length of a flange,in distinction from thickness.
0.2400in. and 0.2420in.
The style designation indicating the configuration that most nearly corresponds to the means whereby the lubricant is set into the item.
grooved circular
The physical configuration of the corner.
relief groove right flange body corner
The physical configuration of the corner.
relief groove right flange outside left corner
The physical configuration of the corner.
round inside left corner
The physical configuration of the corner.
round inside right corner
The physical configuration of the corner.
square left flange body corner
The physical configuration of the corner.
square left flange outside right corner
The physical configuration of the corner.
square outside left corner
The physical configuration of the corner.
square outside right corner
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
zzzy
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.
1 hole and 2 hole
Indicates the location and number of grooves on the surface of the item.
1 internal
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum outer layer
The chemical compound or mechanical mixture properties of which the item is fabricated.
lead inner layer and tin inner layer
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 1010 intermediate layer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MB-8, fscm 99267 mfr ref single material response outer layer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
sae assn std single material response intermediate layer
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
tin inner layer
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
18b segmented, external flanges both ends
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.
as differentiated by magnetic permaeability shall beless than 1.2 before fabrication and not greater than 2.0 after fabrication as measured in a 200 oersted field by a permeability indicator specified in military spec MIL-I-17214
Answers.
1PR
18b segmented, external flanges both ends
Steel comp 1010 intermediate layer
Lead inner layer and tin inner layer
Aluminum outer layer
0.3930 inches minimum second and 0.3950 inches maximum second
0.3125 inches first
Schedule B number: 8482997090
nmfc 114850
Parts, for roller bearings or for combined ball/roller bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
NSN 3120-00-415-1732 BEARING,SLEEVE
18b segmented, external flanges both ends tin inner layer surface treated 3.4790" overall length 0.3930" second hole diameter
- NIIN
- 004151732
- NIIN Date
- 11/18/70
- Schedule B
- 8482997090
- Name Code
- 13205
- FIIG
- A045A0
- Item Weight
- 7.400lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $776.50 PR
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Spain
Availability for X2527 AND X2528 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114850 BEARING/BUSHING O/T BALL/ROLLER I/S
- UFC (universal freight code)
- 58880
Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
X2527 AND X2528 / Bearing,sleeveWhat is the formal definition of this item?
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.
