Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. S1510-26104-2 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.1150in. first and 0.1350in. first ⁓9/64"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
0.7710in. and 0.7910in. ⁓51/64"
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
1.0850in. and 1.0860in.
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.
0.9520in. and 0.9550in.
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.
1.5400in. and 1.5600in.
A measurement taken at right angles to the length of a flange,in distinction from thickness.
0.0680in. and 0.0880in.
The style designation indicating the configuration that most nearly corresponds to the means whereby the lubricant is set into the item.
grooved spiral circular
The physical configuration of the corner.
chamfered inside left corner
The physical configuration of the corner.
chamfered outside left corner
The physical configuration of the corner.
square inside right corner
The physical configuration of the corner.
square left flange body corner
The physical configuration of the corner.
square left flange outside right corner
The physical configuration of the corner.
square outside right corner
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
100.0 microinches
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.
1 hole
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
4 grooves 90 deg apart in face of flange, oil hole in body required tocut internal spiral groove, dim, for internal spiral groove, 0.0620 in. w, 0.0450 in. min, 0.0500 in. max deep, 0.0300 in. min, 0.0320 in. max bottom radias
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy 172 or copper alloy 173
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-C-530 fed spec single material response
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
22c solid, external flange one end
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-I-6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Answers.
1EA
22c solid, external flange one end
Copper alloy 172 or copper alloy 173
0.1150 inches minimum first and 0.1350 inches maximum first
Schedule B number: 8482997090
nmfc 114870
Parts, for roller bearings or for combined ball/roller bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
NSN 3120-00-972-5327 BEARING,SLEEVE
22c solid, external flange one end 4 grooves 90 deg apart in face of flange, oil hole in body required tocut internal spiral groove, dim, for internal spiral groove, 0.0620 in. w, 0.0450 in. min, 0.0500 in. max deep, 0.0300 in. min, 0.0320 in. max bottom radias 0.7710" overall length 0.1150" first hole diameter
- NIIN
- 009725327
- NIIN Date
- 01/01/62
- Schedule B
- 8482997090
- Name Code
- 13205
- FIIG
- A045A0
- QUP
- 1
- Historical Price
- $31.63 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Army
Availability for S1510-26104-2 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Rating variable
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114870 BEARING/BUSHING METAL
- UFC (universal freight code)
- 58890
Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
S1510-26104-2 / Bearing,sleeveWhat is the formal definition of this item?
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.
