Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. K671164-13 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.2500in. first ⁓1/4"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
2.0000in. ⁓2-1/64"
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
1.7545in. and 1.7550in.
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.
1.5115in. and 1.5120in.
The style designation indicating the configuration that most nearly corresponds to the means whereby the lubricant is set into the item.
grooved open both ends
The physical configuration of the corner.
chamfered inside right corner
The physical configuration of the corner.
chamfered inside left corner
The physical configuration of the corner.
square outside left corner
The physical configuration of the corner.
square outside right corner
Those features,not otherwise specified,which may be required for proper functioning of the item.
casehardened
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches inside diameter surface of body
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches outside diameter surface of body
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches left end surface of body
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches right end surface of body
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.
1 hole
Indicates the location and number of grooves on the surface of the item.
1 internal
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
partial groove cut on o.d. across hole drilled through one wall
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel uns K24065
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6709, comp a, cond c mil spec single material response
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
17c solid, plain, no outside flanges
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
84955-KPS208 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Answers.
1EA
17c solid, plain, no outside flanges
Steel uns k24065
0.2500 inches first
Schedule B number: 8482997090
nmfc 114850
Parts, for roller bearings or for combined ball/roller bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
NSN 3120-00-107-1614 BEARING,SLEEVE
17c solid, plain, no outside flanges partial groove cut on o.d. across hole drilled through one wall 2.0000" overall length 0.2500" first hole diameter
- NIIN
- 001071614
- NIIN Date
- 09/26/73
- Schedule B
- 8482997090
- Name Code
- 13205
- FIIG
- A045A0
- Item Weight
- 0.700lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $141.85 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for K671164-13 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114850 BEARING/BUSHING O/T BALL/ROLLER I/S
- UFC (universal freight code)
- 58880
Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
K671164-13 / Bearing,sleeveWhat is the formal definition of this item?
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.
