Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. HS5513-1 specification
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.4710in. ⁓1-31/64"
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
1.9553in. and 1.9556in.
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.
1.7370in. and 1.7430in.
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.
2.7400in. and 2.7600in.
A measurement taken at right angles to the length of a flange,in distinction from thickness.
0.0900in. and 0.0920in.
The physical configuration of the corner.
square inside right corner
The physical configuration of the corner.
square inside left corner
The physical configuration of the corner.
square left flange outside right corner
The physical configuration of the corner.
square outside left corner
The physical configuration of the corner.
square outside right corner
The physical configuration of the corner.
undercut left flange body corner
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
63.0 microinches
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
shell shall be 100 pct magnetic particle inspected per MIL-STD-1949; plating optional on outside left corner
The chemical compound or mechanical mixture properties of which the item is fabricated.
plastic polytetrafluoroethylene inside diameter surface of body and plastic polyamide inside diameter surface of body and plastic phenolic inside diameter surface of body
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 630 left end surface of body and flange
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 630 outside diameter surface of body
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 630 outside diameter surface of flange
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 630 right end surface of body
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 630 right end surface of left flange
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5643 assn std single material response outside diameter surface of body
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5643 assn std single material response outside diameter surface of flange
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5643 assn std single material response left end surface of body and flange
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5643 assn std single material response right end surface of body
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5643 assn std single material response right end surface of left flange
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-B-81820 mil spec single material response inside diameter surface of body
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
chromium left end surface of body and flange
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate inside diameter surface of body
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate outside diameter surface of body
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate outside diameter surface of flange
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate right end surface of left flange
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate right end surface of body
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-C-320, class 2, type 2 fed spec single treatment response left end surface of body and flange
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response inside diameter surface of body
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response outside diameter surface of flange
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response outside diameter surface of body
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response right end surface of body
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response right end surface of left flange
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
22c solid, external flange one end
Answers.
1EA
22c solid, external flange one end
Steel comp 630 right end surface of left flange
Steel comp 630 right end surface of body
Steel comp 630 outside diameter surface of flange
Steel comp 630 outside diameter surface of body
Steel comp 630 left end surface of body and flange
Plastic polytetrafluoroethylene inside diameter surface of body and plastic polyamide inside diameter surface of body and plastic phenolic inside diameter surface of body
Schedule B number: 8482997090
nmfc 133300
Parts, for roller bearings or for combined ball/roller bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
NSN 3120-01-286-6149 BEARING,SLEEVE
22c solid, external flange one end passivate right end surface of body surface treated shell shall be 100 pct magnetic particle inspected per mil-std-1949; plating optional on outside left corner 1.4710" overall length
- NIIN
- 012866149
- NIIN Date
- 10/05/88
- Schedule B
- 8482997090
- Name Code
- 13205
- FIIG
- A045A0
- Item Weight
- 0.400lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $624.75 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Army
- - Singapore
- - Netherlands
Availability for HS5513-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Food sercive equipment, (mkt), field ranges, vacuum cans, beverage containers, etc
- NMFC (national motor freight code)
- 133300 MACHINERY/MACHINES NOI
- UFC (universal freight code)
- 63220
Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
HS5513-1 / Bearing,sleeveWhat is the formal definition of this item?
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.
