Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 7653109-15 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.37475in. first and 0.62750in. first ⁓41/64"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
5.5900in. ⁓5-19/32"
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
10.0600in.
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.
9.5600in.
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.
10.1680in. and 10.1730in.
A measurement taken at right angles to the length of a flange,in distinction from thickness.
3.9600in.
9.0620in. and 9.0650in.
3.9000in.
The style designation indicating the configuration that most nearly corresponds to the means whereby the lubricant is set into the item.
grooved open one end
The physical configuration of the corner.
chamfered inside left corner
The physical configuration of the corner.
chamfered outside left corner
The physical configuration of the corner.
round left flange body corner
The physical configuration of the corner.
round outside right corner
The physical configuration of the corner.
square inside right corner
The physical configuration of the corner.
square left flange outside right corner
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches inside diameter surface of body
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches outside diameter surface of body
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches left end surface of body and flange
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches right end surface of body
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches right end surface of left flange
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches outside diameter surface of flange
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.
2 hole
Indicates the location and number of grooves on the surface of the item.
6 internal
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2014
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-200/2 fed spec single material response or QQ-A-367 fed spec single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
copper alloy outside diameter surface of flange
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize left end surface of body and flange
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize inside diameter surface of body
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize outside diameter surface of body
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize right end surface of body
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize right end surface of left flange
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625, TYPE2, CLASS1 mil spec 2nd treatment response left end surface of body and flange
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625, TYPE2, CLASS1 mil spec 2nd treatment response outside diameter surface of body
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625, TYPE2, CLASS1 mil spec 2nd treatment response right end surface of body
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625, TYPE2, CLASS1 mil spec 2nd treatment response right end surface of left flange
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625, TYPE2, CLASS1 mil spec 2nd treatment response inside diameter surface of body
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-W-6712, type 2 mil spec 1st treatment response outside diameter surface of flange
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
22C-1 solid, external flange one end, internal flange one end
Answers.
1EA
22c-1 solid, external flange one end, internal flange one end
Aluminum alloy 2014
0.37475 inches minimum first and 0.62750 inches maximum first
Schedule B number: 8482997090
nmfc 114820
Parts, for roller bearings or for combined ball/roller bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
NSN 3120-01-166-2395 BEARING,SLEEVE
22c-1 solid, external flange one end, internal flange one end anodize right end surface of left flange surface treated 5.5900" overall length 0.37475" first hole diameter
- NIIN
- 011662395
- NIIN Date
- 11/09/83
- Schedule B
- 8482997090
- Name Code
- 13205
- FIIG
- A045A0
- Item Weight
- 10.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $803.25 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 8340951-70 | Cage 98747 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for 7653109-15 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
7653109-15 / Bearing,sleeveWhat is the formal definition of this item?
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.
