Serving our customers with quality and safety first.
0.1590in. first and 0.1640in. first ⁓11/64"
1.3400in. ⁓1-11/32"
0.3755in. and 0.3757in.
1.4400in.
0.4080in.
0.1300in.
square center flange left body corner
square center flange outside left corner
square center flange outside right corner
square inside right corner
square inside left corner
square outside left corner
square outside right corner
undercut center flange right body corner
16.0 microinches inside diameter surface of body
63.0 microinches left end surface of body
63.0 microinches outside diameter surface of body
63.0 microinches outside diameter surface of flange
63.0 microinches left end surface of flange
63.0 microinches right end surface of flange
63.0 microinches right end surface of body
3 hole
0.6300in.
0.8000in. and 0.8040in.
antirotation holes through flang face, equally spaced on 1.060 in. dia bolt circle; clear chemical film surface treatment overa++ except bore
aluminum alloy 6061
QQ-A-225/8-T651 fed spec single material response
21c solid, external flange
1EA
21c solid, external flange
Aluminum alloy 6061
0.1590 inches minimum first and 0.1640 inches maximum first
Schedule B number: 8482997090
nmfc 114850
Parts, for roller bearings or for combined ball/roller bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
21c solid, external flange antirotation holes through flang face, equally spaced on 1.060 in. dia bolt circle; clear chemical film surface treatment overa++ except bore 1.3400" overall length 0.1590" first hole diameter
Nothing similar to this part number was found in our inventory
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.