Serving our customers with quality and safety first.
0.9400in. ⁓61/64"
3.4960in. and 3.4980in.
3.0050in. and 3.0070in.
4.6300in.
0.1500in.
chamfered outside right corner
square inside right corner
square left flange body corner
square inside left corner
square left flange outside right corner
square outside left corner
32.0 microinches inside diameter surface of body
aluminum alloy 7075 outer layer
plastic inner layer
QQ-A-225/9 comp T73 fed spec single material response outer layer or QQ-A-200/11 comp T73 or T73510 or T73511 fed spec single material response outer layer
anodize inside diameter surface of body and dichromate inside diameter surface of body
anodize outside diameter surface of body and dichromate outside diameter surface of body
anodize right end surface of left flange and dichromate right end surface of left flange
anodize right end surface of body and dichromate right end surface of body
paint left end surface of body and flange
paint outside diameter surface of flange
1EA
Plastic inner layer
Aluminum alloy 7075 outer layer
Schedule B number: 8482997090
nmfc 114870
Parts, for roller bearings or for combined ball/roller bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
paint outside diameter surface of flange surface treated 0.9400" overall length
Nothing similar to this part number was found in our inventory
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.