Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 12Y3318 specification
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.
0.5312in. first
A measurement of the longest dimension of the slot,in distinction from width.
0.2187in. first
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
2.6875in. ⁓2-45/64"
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.
2.4400in. and 2.4420in.
The style designation indicating the configuration that most nearly corresponds to the means whereby the lubricant is set into the item.
grooved closed both ends
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.
1 slot
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
one tapped hole through outside diameter surface of body
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy 937
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
sae assn std single material response
Answers.
Copper alloy 937
Schedule B number: 8482997090
nmfc 114820
Parts, for roller bearings or for combined ball/roller bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
NSN 3120-00-509-8271 BEARING,SLEEVE
one tapped hole through outside diameter surface of body 2.6875" overall length
- NIIN
- 005098271
- NIIN Date
- 01/01/63
- Schedule B
- 8482997090
- Name Code
- 13205
- FIIG
- A045A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 22Y3318A | Cage 33323 |
| 2. | 16A7442 | Cage 95201 |
| 3. | BB1761 | Cage 56442 |
| 4. | 380051078 | Cage 63734 |
| 5. | 358210 | Cage 65282 |
Major End Users Countries and entities
- - Greece
Availability for 12Y3318 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
12Y3318 / Bearing,sleeveWhat is the formal definition of this item?
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.
