Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS13977-1 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.3020in. first and 0.3220in. first ⁓21/64"
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
3.0670in.
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.
2.8764in. and 2.8774in.
The element,compound,or mixture with which the item is lubricated.
lubricating oil
The style designation indicating the configuration that most nearly corresponds to the means whereby the lubricant is set into the item.
grooved circular
A measurement from the outer surface of an item to the outermost point of the locking lug.
0.0450in. and 0.0550in.
The distance,measured along a straight line parallel to the longitudinal axis of the lug,from one edge to the other.
0.1900in. and 0.2200in.
The distance,measured along a straight line,perpendicular to the longitudinal axis of the lug,from one edge to the other.
0.1750in. and 0.1800in.
The physical configuration of the corner.
square all corners
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.
2 hole
The angle formed by the centerline of the bearing and the centerline of two holes not in the same plane.
35.0 degrees
Indicates the location and number of grooves on the surface of the item.
1 internal
0.4115in. and 0.4210in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
17d half sleeve, plain, no outside flanges
Answers.
17d half sleeve, plain, no outside flanges
0.3020 inches minimum first and 0.3220 inches maximum first
Schedule B number: 8483308090
nmfc 114850
Plain shaft bearings, without housing, except spherical
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
NSN 3120-00-374-9724 BEARING HALF,SLEEVE
17d half sleeve, plain, no outside flanges 0.3020" first hole diameter
- NIIN
- 003749724
- NIIN Date
- 01/01/63
- Schedule B
- 8483308090
- Name Code
- 22210
- FIIG
- A045A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $9.05 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 10A4867 | Cage 81240 |
Major End Users Countries and entities
- - Department of The Army
- - Department of The Air Force
- - Greece
Availability for MS13977-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Low sensitivity, category iv, aa&e, unclassified
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114850 BEARING/BUSHING O/T BALL/ROLLER I/S
- UFC (universal freight code)
- 58880
Similar by Design Other bearing halfs with similar characteristics
Nothing similar to this part number was found in our inventory
MS13977-1 / Bearing half,sleeveWhat is the formal definition of this item?
A half of a two-piece split type bearing, sleeve.
