Serving our customers with quality and safety first.
0.2400in. and 0.2600in. first ⁓17/64"
1.1905in. and 1.1925in. ⁓1-13/64"
1.7545in. and 1.7560in.
1.6275in. and 1.6282in.
lubricating oil
28058725972
2.3140in. and 2.3740in.
2.3140in. and 2.3740in.
0.0810in. and 0.0830in.
0.0810in. and 0.0830in.
grooved circular
0.0450in. and 0.0550in.
0.1900in. and 0.2200in.
0.1750in. and 0.1800in.
round left flange outside right corner
round outside left corner
round outside right corner
round inside left corner
round inside right corner
square left flange body corner
square right flange body corner
square right flange outside left corner
1 hole
28.0 degrees
1 internal
0.3535in. and 0.3630in.
copper alloy inner layer
steel outer layer
FED-STD-66 fed std 2nd material response outer layer
MS13826-1, 96906 mfr ref 1st material response inner layer
tin
MS13826-1, 96906 mfr ref single treatment response
18d half sleeve, external flanges both ends
1EA
18d half sleeve, external flanges both ends
Steel outer layer
Copper alloy inner layer
0.2400 inches minimum and 0.2600 inches maximum first
Schedule B number: 8483308090
nmfc 114870
Plain shaft bearings, without housing, except spherical
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
Used on 28058725972. 18d half sleeve, external flanges both ends tin surface treated 1.1905" overall length 0.2400" hole diameter
1. | ERG404 | Cage 66289 |
2. | ERG404 | Cage 02978 |
Nothing similar to this part number was found in our inventory
A half of a two-piece split type bearing, sleeve.