Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. J506 FIG3BIMETAL specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.3130in. and 0.3150in. first ⁓21/64"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.7480in. and 1.7500in. ⁓1-3/4"
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
3.4375in.
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.
3.2000in. and 3.2005in.
The element,compound,or mixture with which the item is lubricated.
lubricating oil
The distance,measured along a straight line parallel to the longitudinal axis of the bearing,from the center of the aperture to the left end of the bearing.
0.8750in. first
The style designation indicating the configuration that most nearly corresponds to the means whereby the lubricant is set into the item.
grooved circular
The physical configuration of the corner.
chamfered inside right corner
The physical configuration of the corner.
chamfered inside left corner
The physical configuration of the corner.
square outside left corner
The physical configuration of the corner.
square outside right corner
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.
3 hole
The angle formed by the centerline of the bearing and the centerline of two holes not in the same plane.
30.0 degrees
Indicates the location and number of grooves on the surface of the item.
1 internal
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy 544 inner layer
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 1137 outer layer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm A109 assn std single material response outer layer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
sae J459 assn std single material response or sae J460 assn std single material response inner layer
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
17d half sleeve, plain, no outside flanges
The document designator of the specification or standard which established the item of supply.
81349-MIL-B-13506 government specification and 81343-J506 professional/industrial association standard
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.
3 type and a style and 2 class and bimetal composition and 3.200in.X1.750in.lg size
The technical differentiating characteristic/s/ of an item of supply which depart/s/ from the text of a specification or a standard in that it represents a selection of characteristics stated in the specification or standard as being optional,or a variation from one or more of the stated characteristics,or an additional characteristic not stated in the specification or standard.
as modified by 1 piece bearing half sleeve
Answers.
17d half sleeve, plain, no outside flanges
Steel comp 1137 outer layer
Copper alloy 544 inner layer
0.3130 inches minimum and 0.3150 inches maximum first
Schedule B number: 8483308090
Plain shaft bearings, without housing, except spherical
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
NSN 3120-00-352-3545 BEARING HALF,SLEEVE
17d half sleeve, plain, no outside flanges 1.7480" overall length 0.3130" hole diameter
- NIIN
- 003523545
- NIIN Date
- 06/28/86
- Schedule B
- 8483308090
- Name Code
- 22210
- FIIG
- A045A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | J506 FIG 3 | Cage 81343 |
| 2. | MIL-B-13506 | Cage 81349 |
Major End Users Countries and entities
- - Republic of Korea
Availability for J506 FIG3BIMETAL A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other bearing halfs with similar characteristics
Nothing similar to this part number was found in our inventory
J506 FIG3BIMETAL / Bearing half,sleeveWhat is the formal definition of this item?
A half of a two-piece split type bearing, sleeve.
