Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. ST4M152-4A4GK specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.2500in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
externally threaded
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.7800in. ⁓1-25/32"
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.
0.2495in. and 0.2500in.
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.
0.8000in.
The element,compound,or mixture with which the item is lubricated.
grease
0.7500in. and 0.7800in.
0.3350in. and 0.3500in.
0.4320in. and 0.4370in.
1.3650in. and 1.3950in.
The number of seals included on the item.
2
The number of shields included on the item.
2
Indicates the type of seal provided with the bearing.
contact
Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.
SELF-Aligning
Indicates the location of the self-alignment feature.
internal
Those features,not otherwise specified,which may be required for proper functioning of the item.
aligning ring
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
28
A designation that is used for the purpose of general identification of the thread.
0.250in. ⁓1/4"
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
supp
10.00 degrees
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
NAS513 keyway in shank and red nylon lubricator fitting
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.
MIL-G-81322 mil spec single material response
The chemical compound or mechanical mixture properties of which the item is fabricated.
plastic seal
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4130 rod end body or steel comp 8620 rod end body
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 430 shield
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E52100 inner ring
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E52100 roller
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
66 fed std single material response roller
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
66 fed std single material response inner ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 3652 assn std single material response seal
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6758 mil spec 1st material response rod end body or MIL-S-8690 mil spec 2nd material response rod end body
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-S-763 fed spec single material response shield
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium exposed surfaces as mounted
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, ty 1, cl 2 fed spec single treatment response exposed surfaces as mounted
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
single row, concave rollers
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.
item is not csi but has critical features such as tolerance, heat treatment, surface finish, or material type and special insp. req's such as magnetic
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
1EA
Unjf
Single row, concave rollers
Steel comp e52100 roller
Steel comp e52100 inner ring
Steel comp 430 shield
Steel comp 4130 rod end body or steel comp 8620 rod end body
Plastic seal
28
Right-hand
3a
Schedule B number: 8482500000
nmfc 114820
Other cylindrical roller bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-00-369-1280 BEARING,ROLLER,ROD END
unjf thread series single row, concave rollers cadmium exposed surfaces as mounted surface treated NAS513 keyway in shank 28 thread quantity per inch 0.2495" bore diameter 1.7800" overall length right-hand 3a thread class
- NIIN
- 003691280
- NIIN Date
- 03/03/74
- Schedule B
- 8482500000
- Name Code
- 00050
- FIIG
- A044A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $529.58 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | SM4-4M1-501 | Cage 77896 |
Major End Users Countries and entities
- - Department of The Air Force
- - Israel
Availability for ST4M152-4A4GK A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
ST4M152-4A4GK / Bearing,roller,rod endWhat is the formal definition of this item?
A special single or multiple-row roller bearing, rigid or self-aligning, and constructed with either inside threaded, plain hollow, maile threaded, or solid shank.
