SPH4-6B Roller Rod End Bearing

Datasheet. SPH4-6B specification

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.3730in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

659 hollow

Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

1.9000in. ⁓1-29/32"

Bore Diameter
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.

0.2495in. and 0.2500in.

Overall Outside Diameter
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.

0.7500in. and 0.8000in.

Lubrication Material
The element,compound,or mixture with which the item is lubricated.

grease

Outer Ring Width

0.3350in. and 0.3500in.

Inner Ring Width

0.4320in. and 0.4370in.

Length From Bore Center To Shank End

1.4850in. and 1.5150in.

Shank Bore Diameter

0.2500in.

Shank Bore Depth

1.0470in.

Seal Quantity
The number of seals included on the item.

Shield Quantity
The number of shields included on the item.

Bearing Seal Type
Indicates the type of seal provided with the bearing.

contact

Alignment Type
Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.

SELF-Aligning

Self-alignment Location
Indicates the location of the self-alignment feature.

internal

Self-alignment Angle

10.00 degrees

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

with means for relubrication

Lubrication Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.

MIL-G-23827 mil spec single material response

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

rubber BUTADIENE-Acrylonitrile class nbr seal

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E4340H inner ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E4340H outer ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E4340H rod end body

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E4340H roller

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel corrosion resisting shield

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std single material response roller

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std single material response rod end body

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std single material response inner ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std single material response outer ring

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium all external/exposed metal surfaces

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, ty 1, cl 2 fed spec single treatment response all external/exposed metal surfaces

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

single row, concave rollers

Answers.

What quantity is this sold in?

1EA

What is the style?

Single row, concave rollers