Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 215-70429-4 specification
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.7480in. and 0.7490in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
659 hollow
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
3.8300in. ⁓3-27/32"
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.
0.3743in. and 0.3747in.
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.
1.1800in.
The element,compound,or mixture with which the item is lubricated.
grease
The national stock number or the identification information of the end equipment for which the item is a part.
A-7D acft
0.5570in. and 0.5620in.
0.4700in.
3.2200in. and 3.2600in.
0.4375in.
2.5000in.
Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.
rigid
Those features,not otherwise specified,which may be required for proper functioning of the item.
external lubrication fitting and lubrication hole and lubrication groove
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
plate expose surfaces of bearing as mounted; chromium plate rod end body below housing, 0.880 in., all others cadmium plates; two 0.250 in. dia thru rivet holes in shank, 0.750 in. c to c, 2.020 in. from bore c to first hole
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.
MIL-G-23827 mil spec single material response or 215-00613, A-7A, fscm 800378 mfr ref single material response or 215-00613, A-7B fscm 80378 mfr ref single material response or 216-00613, A-7D fscm 80378 mfr ref single material response or 218-00613, A-7E, fscm 80378 mfr ref single material response
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4340 rod end body
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E52100 inner ring
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E52100 retaining plate
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E52100 roller
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
66 fed std single material response roller
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
66 fed std single material response retaining plate
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
66 fed std single material response inner ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
66 fed std single material response outer ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
CVA1-585, cond C-1, fscm 80378 mfr ref single material response rod end body
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium inner ring
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium outer ring
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium retaining plate
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium rod end body and chromium rod end body
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
single row, needle roller
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-I-6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) . and 80378-cva 13-23 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Answers.
1EA
Single row, needle roller
Steel comp e52100 roller
Steel comp e52100 retaining plate
Steel comp e52100 inner ring
Steel comp 4340 rod end body
Schedule B number: 8482500000
nmfc 114820
Other cylindrical roller bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-01-094-9309 BEARING,ROLLER,ROD END
Used on a-7d acft. single row, needle roller cadmium rod end body surface treated plate expose surfaces of bearing as mounted; chromium plate rod end body below housing, 0.880 in., all others cadmium plates; two 0.250 in. dia thru rivet holes in shank, 0.750 in. c to c, 2.020 in. from bore c to first hole 0.3743" bore diameter 3.8300" overall length
- NIIN
- 010949309
- NIIN Date
- 05/20/80
- Schedule B
- 8482500000
- Name Code
- 00050
- FIIG
- A044A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $1,306.03 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Air Force
- - Greece
Availability for 215-70429-4 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
215-70429-4 / Bearing,roller,rod endWhat is the formal definition of this item?
A special single or multiple-row roller bearing, rigid or self-aligning, and constructed with either inside threaded, plain hollow, maile threaded, or solid shank.
