Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 114DS545-1 specification
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
0.9793in. and 0.9843in.
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.
3.4843in. and 3.4848in.
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.
5.1177in. and 5.1181in.
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.
ground
The means used in manufacturing the retainer.
machined
The ability of the bearing to provide freedom for axial movement of the shaft relative to the housing.
nonlocating
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
ring and rollers black oxide coated per AMS2485, serial no. marked on ring per BAC5307, category VE-81205
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy retainer
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel outer ring
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel roller
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
114DS545-1, 77272 mfr ref single material response retainer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
FED-STD-66 fed std single material response outer ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
FED-STD-66 fed std single material response roller
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
52676-471637 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) . or 52676-47168A3 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) . or 52676-47090A8 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Answers.
1EA
Steel roller
Steel outer ring
Copper alloy retainer
0.9793 inches minimum and 0.9843 inches maximum
Schedule B number: 8482500000
nmfc 114820
Other cylindrical roller bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-00-836-0445 BEARING,ROLLER,CYLINDRICAL
ring 3.4843" bore diameter 0.9793" overall width
- NIIN
- 008360445
- NIIN Date
- 01/01/62
- Schedule B
- 8482500000
- Name Code
- 00015
- FIIG
- A044A0
- QUP
- 1
- Historical Price
- $627.68 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 456660 | Cage 52676 |
| 2. | 454724 | Cage 52676 |
Major End Users Countries and entities
- - Department of The Army
Availability for 114DS545-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
114DS545-1 / Bearing,roller,cylindricalWhat is the formal definition of this item?
A nonadjustable roller bearing consisting of a single or multiple-row of hardened cylindrical rollers and a retainer used with or without inner or oute r rings. excludes bearing, roller, airframe.
