Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. SMC502087 specification
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
4.250in.
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.
0.166in. and 0.174in.
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.
3.125in.
Indicates the type of mounting hole(s) provided on the item.
round, unthreaded, counterbored
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
mounting holes counterbored 0.312 in. dia by 0.125 in. deep
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
chromate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-C-5541 mil spec single treatment response
Answers.
Aluminum alloy
4.250 inches
Schedule B number: 8482997090
nmfc 114820
Parts, for roller bearings or for combined ball/roller bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-00-304-8710 PLATE,RETAINING,BEARING
chromate surface treated mounting holes counterbored 0.312 in. dia by 0.125 in. deep 4.250" outside diameter
- NIIN
- 003048710
- NIIN Date
- 10/17/73
- Schedule B
- 8482997090
- Name Code
- 22293
- FIIG
- A093A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Lithuania
- - Spain
- - New Zealand
- - Portugal
Availability for SMC502087 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other plates with similar characteristics
Nothing similar to this part number was found in our inventory
SMC502087 / Plate,retaining,bearingWhat is the formal definition of this item?
A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. it must have drilled and/or tapped holes for mounting purposes. excludes end bell, electrical rotating equipment.
