Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. PWA12242 specification
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.
3.435in.
The depth of the process used to enlarge part of a hole.
0.375in.
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
8.750in.
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.
0.281in.
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.
2.435in.
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).
single bolt hole circle
A measurement of a straight line from the midpoint of a rounded corner to its periphery.
0.135in.
The number of holes in a bolt circle.
3
An overall measurement of the smallest dimension of an item,in distinction from length or width.
0.375in.
A measurement from the bottom to the top of a raised surface,in distinction from depth.
0.188in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
20
A designation that is used for the purpose of general identification of the thread.
0.250in. ⁓1/4"
8.016in.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
4.000 by 5.000 in. dia bolt center; corner bevel dimension 0.047 in. by 30 deg; raised surface with round counterbored aperture
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
oxide
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
ams 2485 assn std single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Answers.
Unc
Steel
20
8.750 inches
Schedule B number: 8482997090
Parts, for roller bearings or for combined ball/roller bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-01-115-0008 PLATE,RETAINING,BEARING
unc thread series oxide surface treated 4.000 by 5.000 in. dia bolt center; corner bevel dimension 0.047 in. by 30 deg; raised surface with round counterbored aperture 20 thread quantity per inch 8.750" outside diameter
- NIIN
- 011150008
- NIIN Date
- 06/26/81
- Schedule B
- 8482997090
- Name Code
- 22293
- FIIG
- A093A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Kuwait
Availability for PWA12242 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other plates with similar characteristics
Nothing similar to this part number was found in our inventory
PWA12242 / Plate,retaining,bearingWhat is the formal definition of this item?
A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. it must have drilled and/or tapped holes for mounting purposes. excludes end bell, electrical rotating equipment.
