Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. CVAN65-703-1899927 P/N 14 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
flat w/o aperture
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
3.875in.
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.
0.250in.
A measurement taken at right angles to the length of the mounting slot,in distinction from thickness.
0.375in.
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).
vertical centerline
An overall measurement of the smallest dimension of an item,in distinction from length or width.
0.125in.
The national stock number or the identification information of the end equipment for which the item is a part.
ticonderoga class cg (47)
The shortest straight line between flats,perpendicular to the height.
3.875in. ⁓3-7/8"
The length of a straight line which passes through the center of the countersink,and terminates at the circumference.
0.250in.
The included angle of the countersink.
0.375 radians
Indicates the type of mounting hole(s) provided on the item.
round, unthreaded, countersunk
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
bearing has one 1.531 inch diameter hole
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
two flats
Answers.
1EA
Two flats
Copper alloy
3.875 inches
Schedule B number: 8482997090
nmfc 114820
Parts, for roller bearings or for combined ball/roller bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-01-492-9229 PLATE,RETAINING,BEARING
Used on ticonderoga class cg (47). two flats bearing has one 1.531 inch diameter hole 3.875" outside diameter
- NIIN
- 014929229
- NIIN Date
- 12/17/01
- Schedule B
- 8482997090
- Name Code
- 22293
- FIIG
- A093A0
- QUP
- 1
- Historical Price
- $49.78 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for CVAN65-703-1899927 P/N 14 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other plates with similar characteristics
Nothing similar to this part number was found in our inventory
CVAN65-703-1899927 P/N 14 / Plate,retaining,bearingWhat is the formal definition of this item?
A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. it must have drilled and/or tapped holes for mounting purposes. excludes end bell, electrical rotating equipment.
