Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 70400-06707-110 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
flat w/aperture
A measurement taken at right angles to the length of an item,in distinction from thickness.
1.346in.
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.
0.096in.
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.
0.125in.
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).
three holes
0.970in.
An overall measurement of the smallest dimension of an item,in distinction from length or width.
0.290in.
Indicates the type of mounting hole(s) provided on the item.
round, unthreaded
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
cut out on one side
The chemical compound or mechanical mixture properties of which the item is fabricated.
plastic phenolic and glass fiber or plastic epoxy and glass fiber
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-P-25515 mil spec 1st material response or MIL-P-18177 mil spec 2nd material response
Answers.
1EA
Plastic phenolic and glass fiber or plastic epoxy and glass fiber
Schedule B number: 8482997090
nmfc 114820
Parts, for roller bearings or for combined ball/roller bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-01-276-5870 PLATE,RETAINING,BEARING
cut out on one side
- NIIN
- 012765870
- NIIN Date
- 04/09/88
- Schedule B
- 8482997090
- Name Code
- 22293
- FIIG
- A093A0
- Item Weight
- 0.100lbs
- Item Dimensions
- 25 X 25 X 25
- QUP
- 1
- Historical Price
- $54.88 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Army
- - Department of The Navy
- - Department of The Air Force
- - Republic of Korea
- - Turkey
Availability for 70400-06707-110 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other plates with similar characteristics
Nothing similar to this part number was found in our inventory
70400-06707-110 / Plate,retaining,bearingWhat is the formal definition of this item?
A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. it must have drilled and/or tapped holes for mounting purposes. excludes end bell, electrical rotating equipment.
