Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 6435-20049-101 specification
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.
8.900in. and 8.920in.
The depth of the process used to enlarge part of a hole.
0.230in.
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
9.615in. and 9.635in.
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.
0.312in.
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.
8.302in. and 8.322in.
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).
single bolt hole circle
The number of holes in a bolt circle.
12
An overall measurement of the smallest dimension of an item,in distinction from length or width.
0.230in.
The length of a straight line which passes through the center of a mounting bolt circle,and terminates at the circumference.
9.500in.
A measurement from the bottom to the top of a raised surface,in distinction from depth.
0.207in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
26.0 rockwell c and 33.0 rockwell c
A designation that is used for the purpose of general identification of the thread.
0.312in. ⁓5/16"
Indicates the type of mounting hole(s) provided on the item.
round, threaded
9.177in. and 9.197in.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
12 scallops equally spaced between holes on od; max surface FINISH-All surfaces 100 microinches aa; retainer saw cut diagonally at 75 and 255 deg by 0.062 in.w; raised surface feature included; aperture shape round and included; aperture type:counterbored; shape:round
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4130
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
oxide
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MILI6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
1EA
Unf
Steel comp 4130
24
9.615 inches minimum and 9.635 inches maximum
Schedule B number: 8482997090
nmfc 114850
Parts, for roller bearings or for combined ball/roller bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-00-982-9994 PLATE,RETAINING,BEARING
unf thread series oxide surface treated 12 scallops equally spaced between holes on od; max surface finish-all surfaces 100 microinches aa; retainer saw cut diagonally at 75 24 thread quantity per inch 9.615" outside diameter
- NIIN
- 009829994
- NIIN Date
- 10/17/66
- Schedule B
- 8482997090
- Name Code
- 22293
- FIIG
- A093A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $840.58 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Army
Availability for 6435-20049-101 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Rating variable
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114850 BEARING/BUSHING O/T BALL/ROLLER I/S
- UFC (universal freight code)
- 58880
Similar by Design Other plates with similar characteristics
Nothing similar to this part number was found in our inventory
6435-20049-101 / Plate,retaining,bearingWhat is the formal definition of this item?
A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. it must have drilled and/or tapped holes for mounting purposes. excludes end bell, electrical rotating equipment.
