Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 570172-3 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
counterbored w/o aperture
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
2.9375in.
0.230in. and 0.232in.
A measurement of the longest dimension from one flat to the opposite flat,in distinction from width.
2.250in.
The length of a straight line which passes through the center of the body,and terminates at the circumference.
2.250in.
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.
0.180in.
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).
four holes
1.678in.
1.678in.
A measurement of the smallest dimension of a body,in distinction from length or width.
0.080in. and 0.082in.
An overall measurement of the smallest dimension of an item,in distinction from length or width.
0.312in.
The national stock number or the identification information of the end equipment for which the item is a part.
B52H ASG-21
The shortest straight line between flats,perpendicular to the height.
2.250in. ⁓2-1/4"
1.6406in.
0.839in.
0.2343in.
0.839in.
Indicates the type of mounting hole(s) provided on the item.
round, unthreaded
The chemical compound or mechanical mixture properties of which the item is fabricated.
magnesium alloy AZ80A
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
four flats
Answers.
1EA
Four flats
Magnesium alloy az80a
2.9375 inches
Schedule B number: 8482997090
nmfc 114820
Parts, for roller bearings or for combined ball/roller bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-01-205-7771 PLATE,RETAINING,BEARING
Used on b52h asg-21. four flats 2.9375" outside diameter
- NIIN
- 012057771
- NIIN Date
- 04/11/85
- Schedule B
- 8482997090
- Name Code
- 22293
- FIIG
- A093A0
- QUP
- 1
- Historical Price
- $116.63 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
Availability for 570172-3 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other plates with similar characteristics
Nothing similar to this part number was found in our inventory
570172-3 / Plate,retaining,bearingWhat is the formal definition of this item?
A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. it must have drilled and/or tapped holes for mounting purposes. excludes end bell, electrical rotating equipment.
