Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 42312-149 specification
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
3.355in. and 3.375in.
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.
2.570in. and 2.590in.
A measurement from the bottom to the top of a raised surface,in distinction from depth.
0.525in. and 0.555in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
26
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
32.0 rockwell c and 37.0 rockwell c
A designation that is used for the purpose of general identification of the thread.
0.250in. ⁓1/4"
Indicates the type of mounting hole(s) provided on the item.
round, unthreaded
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel uns J92200
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
1EA
Unf
Steel uns j92200
26
3.355 inches minimum and 3.375 inches maximum
Schedule B number: 8482997090
nmfc 114820
Parts, for roller bearings or for combined ball/roller bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-01-131-2586 PLATE,RETAINING,BEARING
unf thread series passivate surface treated 26 thread quantity per inch 3.355" outside diameter
- NIIN
- 011312586
- NIIN Date
- 05/06/82
- Schedule B
- 8482997090
- Name Code
- 22293
- FIIG
- A093A0
- Item Weight
- 0.600lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $1,540.98 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 42312E149 | Cage 82402 |
| 2. | 10107495 | Cage A486G |
Major End Users Countries and entities
- - Department of The Navy
- - Finland
- - Spain
Availability for 42312-149 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other plates with similar characteristics
Nothing similar to this part number was found in our inventory
42312-149 / Plate,retaining,bearingWhat is the formal definition of this item?
A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. it must have drilled and/or tapped holes for mounting purposes. excludes end bell, electrical rotating equipment.
