Serving our customers with quality and safety first.
2.250in. and 2.252in.
0.260in.
3.495in. and 3.515in.
3.495in. and 3.515in.
0.280in. and 0.296in.
1.850in. and 1.851in.
single bolt hole circle
3
0.100in. and 0.110in.
3.125in.
1.130in. and 1.150in.
round, unthreaded
2.499in. and 2.500in.
groove on od 0.104 in.w by 2.400 in.dia 0.080 in.from flange, 2nd groove on od 0.620 in.w by 2.060 in.dia 0.280 in.from flange, right internal flange 1.600 in.dia 0.090 in.w, three equally spaced slots 0.375 in.dia end milled on right od 7 deg right of mtg holes, three equally spaced slots 0.375 in.dia end milled left side id 7 deg left side id 7 deg left of mtg holes; raised surface feature:included; aperture shape:round and included; aperture type:counterbored; material:cres, ams 5342 comp 17-4Ph; shape:special
passivate
81349-MIL-I-6866 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
1EA
Schedule B number: 8482997090
nmfc 114820
Parts, for roller bearings or for combined ball/roller bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
passivate surface treated groove on od 0.104 in.w by 2.400 in.dia 0.080 in.from flange, 2nd groove on od 0.620 in.w by 2.060 in.dia 0.280 in.from flange, right internal flange 1.600 in.dia 0.090 in.w, three equally spaced slots 0.375 in.dia end milled on right od 7 deg right of mtg holes, three equally spaced slots 0.375 in.dia end milled left side id 7 deg left side id 7 deg left of mtg holes; raised surface feature:included; aperture shape:round
Nothing similar to this part number was found in our inventory
A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. it must have drilled and/or tapped holes for mounting purposes. excludes end bell, electrical rotating equipment.