Serving our customers with quality and safety first.
raised surface w/ aperture
0.248in. and 0.258in.
1.514in.
5.343in.
0.328in.
2.281in. and 2.296in.
four holes
2.562in.
2.694in.
2.662in. and 2.666in.
1.047in.
32
0.138in. ⁓9/64"
32.0 microinches raised surface
63.0 microinches aperture
3.000in. and 3.015in.
1.278in. and 1.284in.
0.157in.
1.344in. and 1.350in.
round, threaded, counterbored
3.9378in. and 3.9384in.
4.263in. and 4.265in.
second cbore thru backface 3.9371 in. dia min to 3.9379 in. dia max, 1.218 in. nom dp; aperture off ctr and angled from part cl, 0.489 in. part cl to aperture cl front face, 0.93 in. part cl to aperture cl back face; eight unequally spaced 0.156 in. dia thru holes, cbore 0.312 in. dia; six threaded blind holes in back face, four 0.500 in. deep 0.164-32 UNC-2B threads, two 0.190-32 UNC-2B threads for helical coil inserts
steel
cadmium excluding bore or aperture and chromate excluding bore or aperture
QQ-P-416, type 2, class 2 fed spec single treatment response excluding bore or aperture
round
unc
1EA
Unc
Round
Steel
32
5.343 inches
Schedule B number: 8482997090
nmfc 114820
Parts, for roller bearings or for combined ball/roller bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
unc thread series round cadmium excluding bore or aperture surface treated second cbore thru backface 3.9371 in. dia min to 3.9379 in. dia max, 1.218 in. nom dp; aperture off ctr 32 thread quantity per inch 5.343" outside diameter
Nothing similar to this part number was found in our inventory
A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. it must have drilled and/or tapped holes for mounting purposes. excludes end bell, electrical rotating equipment.