Serving our customers with quality and safety first.
raised surface w/aperture
5.000in.
0.342in. and 0.352in.
1.751in. and 1.752in.
two bolt holes circles
2.375in.
2.687in.
4.375in.
1.281in.
2.625in.
6
6
0.562in.
round, unthreaded
2.312in. and 2.313in.
3.187in.
0.376in.
a second set of bolt holes with 0.250-20UNC-3Bx.50 min full thd depth hole depth 1.06 max and csk 90 degrees plus or minus 10 degrees by 0.28in. plus or minus 0101 inch; the third set of bolt holes with 0.3125-18UNC-3B thru 2 holes are 180 degrees apart
aluminum alloy 6061
anodize
MIL-A-8625, type ii, class 2 mil spec single treatment response
round
1EA
Round
Aluminum alloy 6061
5.000 inches
Schedule B number: 8482997090
nmfc 114820
Parts, for roller bearings or for combined ball/roller bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
round anodize surface treated a second set of bolt holes with 0.250-20unc-3bx.50 min full thd depth hole depth 1.06 max 5.000" outside diameter
Nothing similar to this part number was found in our inventory
A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. it must have drilled and/or tapped holes for mounting purposes. excludes end bell, electrical rotating equipment.