Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 18303 specification
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
1.913in. and 1.918in.
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.
0.127in. and 0.133in.
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.
1.225in. and 1.235in.
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).
single bolt hole circle
The number of holes in a bolt circle.
6
The length of a straight line which passes through the center of a mounting bolt circle,and terminates at the circumference.
1.740in.
A measurement from the bottom to the top of a raised surface,in distinction from depth.
0.095in. and 0.100in.
Indicates the type of mounting hole(s) provided on the item.
round, unthreaded
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
one sot 0.380 in. wide, 0.541 in. deep thru thk of plate
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2024 or aluminum alloy 2014
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-225/6 fed spec 1st material response or QQ-A-225/4 fed spec 2nd material response
Answers.
1EA
Aluminum alloy 2024 or aluminum alloy 2014
1.913 inches minimum and 1.918 inches maximum
Schedule B number: 8482997090
nmfc 114820
Parts, for roller bearings or for combined ball/roller bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-00-562-2444 PLATE,RETAINING,BEARING
one sot 0.380 in. wide, 0.541 in. deep thru thk of plate 1.913" outside diameter
- NIIN
- 005622444
- NIIN Date
- 11/17/74
- Schedule B
- 8482997090
- Name Code
- 22293
- FIIG
- A093A0
- QUP
- 1
- Historical Price
- $116.50 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Navy
Availability for 18303 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other plates with similar characteristics
Nothing similar to this part number was found in our inventory
18303 / Plate,retaining,bearingWhat is the formal definition of this item?
A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. it must have drilled and/or tapped holes for mounting purposes. excludes end bell, electrical rotating equipment.
