Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 12930850 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
raised surface w/ aperture
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
1.0000in.
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.
0.4377in.
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).
single bolt hole circle
The number of holes in a bolt circle.
4
An overall measurement of the smallest dimension of an item,in distinction from length or width.
0.4080in.
The length of a straight line which passes through the center of a mounting bolt circle,and terminates at the circumference.
0.5940in.
A measurement from the bottom to the top of a raised surface,in distinction from depth.
0.3470in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
40
A designation that is used for the purpose of general identification of the thread.
0.1120in. ⁓1/8"
Indicates the type of mounting hole(s) provided on the item.
round, threaded
0.7499in.
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 303
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
round
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Answers.
1EA
Unc
Round
Steel comp 303
40
1.0000 inches
Schedule B number: 8482997090
nmfc 114820
Parts, for roller bearings or for combined ball/roller bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-01-413-4482 PLATE,RETAINING,BEARING
unc thread series round 40 thread quantity per inch 1.0000" outside diameter
- NIIN
- 014134482
- NIIN Date
- 05/15/95
- Schedule B
- 8482997090
- Name Code
- 22293
- FIIG
- A093A0
- QUP
- 1
- Historical Price
- $2,975.00 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Army
Availability for 12930850 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other plates with similar characteristics
Nothing similar to this part number was found in our inventory
12930850 / Plate,retaining,bearingWhat is the formal definition of this item?
A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. it must have drilled and/or tapped holes for mounting purposes. excludes end bell, electrical rotating equipment.
