Serving our customers with quality and safety first.
3a
RIGHT-Hand
externally threaded
2.4230in. and 2.4530in. ⁓2-29/64"
0.3750in. and 0.3765in.
0.9900in. and 1.0100in.
1.9280in. and 1.9480in.
0.4010in. and 0.4110in.
0.4950in. and 0.5000in.
1.2500in.
3172 pounds
0.375in.
screw plug closure fitting
24
60.0 rockwell c inner member
copper alloy 485 race insert
steel comp E52100 inner member
steel rod end body
cadmium rod end body
QQ-P-416, ty 1, cl 2 fed spec single treatment response rod end body
ball type
81349-MIL-I-6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
unf
1EA
Unf
Ball type
Steel rod end body
Steel comp e52100 inner member
Copper alloy 485 race insert
24
Right-hand
3a
Schedule B number: 8483308055
nmfc 114850
Transmission shafts: bearing housings, plain shaft bearings with housing, rod end bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
unf thread series ball type cadmium rod end body surface treated 24 thread quantity per inch 0.3750" bore diameter 2.4230" overall length right-hand 3a thread class
1. | 8381429 | Cage 19207 |
2. | 788C078H08 | Cage 97942 |
3. | 339D827H11 | Cage 97942 |
4. | 9010651 | Cage 18876 |
Nothing similar to this part number was found in our inventory
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. it is used to carry a load and to reduce sliding friction. it does not employ rolling elements. the outer member of the assembly is modified to provide a shank. the inner member may be either a plain spherical bearing or a sleeve bearing. excludes bearing, plain, spherical and bearing, plain, self-aligning.