Serving our customers with quality and safety first.
3a
RIGHT-Hand
externally threaded
3.3600in. and 3.3800in. ⁓3-25/64"
0.4370in. and 0.4375in.
1.4900in. and 1.5100in.
2.6150in. and 2.6350in.
0.5720in. and 0.5820in.
0.7480in. and 0.7500in.
1.6000in. and 1.6900in.
0.625in.
18
30.0 rockwell c race insert
34.0 rockwell c rod end body and 42.0 rockwell c rod end body
56.0 rockwell c inner member
plastic race liner
steel comp 440c inner member
steel comp 630 race insert or steel comp 631 race insert or steel comp 440c race insert
steel comp 630 rod end body or steel comp XM-12 rod end body
AMS5630, comp 440c 81343 assn std single material response inner member
AMS5643 17-4Ph assn std 1st material response race insert or AMS5528 17-77 assn std 2nd material response race insert or aisi 410 assn std 3rd material response race insert
AMS5643 type 17-4Ph 81343 assn std 1st material response rod end body or TYPE15-5Ph assn std 2nd material response rod end body
ball type
unf
1EA
Unf
Ball type
Steel comp 630 rod end body or steel comp xm-12 rod end body
Steel comp 630 race insert or steel comp 631 race insert or steel comp 440c race insert
Steel comp 440c inner member
Plastic race liner
18
Right-hand
3a
Schedule B number: 8483308055
nmfc 114820
Transmission shafts: bearing housings, plain shaft bearings with housing, rod end bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
unf thread series ball type 18 thread quantity per inch 0.4370" bore diameter 3.3600" overall length right-hand 3a thread class
1. | 177103 | Cage 09455 |
Nothing similar to this part number was found in our inventory
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. it is used to carry a load and to reduce sliding friction. it does not employ rolling elements. the outer member of the assembly is modified to provide a shank. the inner member may be either a plain spherical bearing or a sleeve bearing. excludes bearing, plain, spherical and bearing, plain, self-aligning.