8602-1

86021 Plain Rod End Bearing

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 8602-1 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

externally threaded

Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

3.7800in. ⁓3-25/32"

Bore Diameter
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.

0.6245in. and 0.6250in.

Outer Member Outside Diameter

1.5000in.

Bore Center To Shank End Distance

3.0300in.

Outer Member Width

0.5620in. and 0.5720in.

Inner Member Width

0.7480in. and 0.7500in.

Shank End To Shoulder Length

1.4100in.

Shank Thread Length

1.0000in.

Static Radial Load Rating
The limiting radial load which the item can carry at rest without permanent deformation of the stressed surface or the danger of fracture.

29000 pounds

Thread Diameter
The length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.6250in.

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

18

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

28.0 rockwell c and 37.0 rockwell c rod end body

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

55.0 rockwell c and 62.0 rockwell c inner member

Lubrication Feature
The feature inherent in the item design to effect lubrication.

SELF-Lubricating liner race liner

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

passivation of inner member optional; no paint on housing bore or knurled and threaded portions of body; od of rod end body knurled over threads 0.875 in. to 1.000 in. from rod end

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

plastic polytetrafluoroethylene race liner

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 440c inner member

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 630 or steel comp XM-12 rod end body

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5630 assn std single material response inner member

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5643 assn std 1st material response and ams 5659 assn std 2nd material response rod end body

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate inner member

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

plastic polyurethane rod end body

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

MIL-C-83286 mil spec single treatment response rod end body

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

MIL-S-5002 mil spec single treatment response inner member

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

shouldered ball type

Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

81349-MIL-I-6866 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unjf

What is the style?

Shouldered ball type

What material is the plain rod end bearing made of ?

Steel comp 630 or steel comp xm-12 rod end body

What material is the plain rod end bearing made of ?

Steel comp 440c inner member

What material is the plain rod end bearing made of ?

Plastic polytetrafluoroethylene race liner

What is the thread quantity per inch?

18

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for 8602-1?

3120-01-224-4683

How is this classified for shipping?

Schedule B number: 8483308055
nmfc 114850
Transmission shafts: bearing housings, plain shaft bearings with housing, rod end bearings

What's the federal classification of 8602-1?

FSC 3120 ⁓ Bearings, plain, unmounted

Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.

Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).

NSN 3120-01-224-4683 BEARING,PLAIN,ROD END

unjf thread series shouldered ball type plastic polyurethane rod end body surface treated passivation of inner member optional; no paint on housing bore or knurled 18 thread quantity per inch 0.6245" bore diameter 3.7800" overall length right-hand 3a thread class

NIIN
012244683
NIIN Date
01/16/86
Schedule B
8483308055 
Name Code
13209
FIIG
A045A0
QUP
Historical Price
$1,708.03 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Defense Logistics Agency 

Availability for 8602-1 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
70.0 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing 
Commodity (for shipments via water)
Bearings 
NMFC (national motor freight code)
114850 BEARING/BUSHING O/T BALL/ROLLER I/S 
UFC (universal freight code)
58880 

Similar by Design Other bearings with similar characteristics

Nothing similar to this part number was found in our inventory

8602-1 / Bearing,plain,rod endWhat is the formal definition of this item?

A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. it is used to carry a load and to reduce sliding friction. it does not employ rolling elements. the outer member of the assembly is modified to provide a shank. the inner member may be either a plain spherical bearing or a sleeve bearing. excludes bearing, plain, spherical and bearing, plain, self-aligning.