Serving our customers with quality and safety first.
3a
LEFT-Hand
externally threaded
3.0940in. ⁓3-3/32"
0.4995in. and 0.5000in.
1.3020in. and 1.3220in.
2.4280in. and 2.4480in.
0.5100in. and 0.5200in.
0.6200in. and 0.6250in.
1.4868in. and 1.5625in.
6600 pounds
0.5000in.
20
SELF-Lubricating liner race liner
one hole in shank 0.170 in. deep, 0.370 in. from shank bottom to center for 0.169 in. dia plastic locking pellet
copper alloy 632 inner member
nickel alloy K-500 race insert
nickel alloy K-500 rod end body
plastic polytetrafluoroethylene race liner
dyflon, fscm 81376 mfr ref single material response race liner
QQ-C-465 fed spec single material response inner member
QQ-N-286 fed spec single material response race insert
QQ-N-286 fed spec single material response rod end body
ball type
unf
1EA
Unf
Ball type
Plastic polytetrafluoroethylene race liner
Nickel alloy k-500 rod end body
Nickel alloy k-500 race insert
Copper alloy 632 inner member
20
Left-hand
3a
Schedule B number: 8483308055
nmfc 114800
Transmission shafts: bearing housings, plain shaft bearings with housing, rod end bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
unf thread series ball type one hole in shank 0.170 in. deep, 0.370 in. from shank bottom to center for 0.169 in. dia plastic locking pellet 20 thread quantity per inch 0.4995" bore diameter 3.0940" overall length left-hand 3a thread class
1. | DREMLH-8-385 | Cage 81376 |
2. | 704-5765851 ITEM 25 | Cage 53711 |
3. | 5765851-0037 | Cage 53711 |
4. | 704-5765851-0037 | Cage 53711 |
5. | 8766851-0025 | Cage 96169 |
6. | 88611610B1 ITEM 25 | Cage 96169 |
Nothing similar to this part number was found in our inventory
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. it is used to carry a load and to reduce sliding friction. it does not employ rolling elements. the outer member of the assembly is modified to provide a shank. the inner member may be either a plain spherical bearing or a sleeve bearing. excludes bearing, plain, spherical and bearing, plain, self-aligning.