Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 114CS123-1 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
externally threaded
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
3.9600in. and 3.9800in. ⁓3-63/64"
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.
0.6245in. and 0.6250in.
1.8100in. and 1.8300in.
3.0450in. and 3.0650in.
0.5550in. and 0.5650in.
0.6860in. and 0.6880in.
1.6650in. and 1.6850in.
The limiting radial load which the item can carry at rest without permanent deformation of the stressed surface or the danger of fracture.
12000 pounds
The length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.625in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
18
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
32.0 rockwell c race insert
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
41.0 rockwell c rod end body
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
58.0 rockwell c inner member
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
8 deg SELF-Alignment in either direction
The chemical compound or mechanical mixture properties of which the item is fabricated.
plastic tetrafluoroethylene race liner
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel inner member
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel race insert
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel rod end body
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
77272114CS123-1 mfr ref single material response race liner
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5630 mil std single material response inner member
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-5000 mil std single material response rod end body
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416 mil std single treatment response
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
ball type
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
77272-5307 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) . and 77272-5424 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
1EA
Unf
Ball type
Steel rod end body
Steel race insert
Steel inner member
Plastic tetrafluoroethylene race liner
18
Right-hand
3a
Schedule B number: 8483308055
nmfc 114850
Transmission shafts: bearing housings, plain shaft bearings with housing, rod end bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
NSN 3120-00-110-8542 BEARING,PLAIN,ROD END
unf thread series ball type cadmium surface treated 8 deg self-alignment in either direction 18 thread quantity per inch 0.6245" bore diameter 3.9600" overall length right-hand 3a thread class
- NIIN
- 001108542
- NIIN Date
- 08/12/68
- Schedule B
- 8483308055
- Name Code
- 13209
- FIIG
- A045A0
- QUP
- 1
- Historical Price
- $502.60 EA
- DEMIL / ITAR
- USML/ITAR controlled item (Code: B)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 77508 | Cage 09455 |
| 2. | ATHE10-9D/FSPP | Cage 15860 |
Major End Users Countries and entities
- - Department of The Army
- - Department of The Air Force
- - Spain
- - Singapore
- - Australia
- - Canada
- - Republic of Korea
- - United Kingdom
- - Netherlands
- - Italy
- - Greece
Availability for 114CS123-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114850 BEARING/BUSHING O/T BALL/ROLLER I/S
- UFC (universal freight code)
- 58880
Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
114CS123-1 / Bearing,plain,rod endWhat is the formal definition of this item?
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. it is used to carry a load and to reduce sliding friction. it does not employ rolling elements. the outer member of the assembly is modified to provide a shank. the inner member may be either a plain spherical bearing or a sleeve bearing. excludes bearing, plain, spherical and bearing, plain, self-aligning.
