Serving our customers with quality and safety first.
3a
RIGHT-Hand
externally threaded
2.5625in. and 2.6050in. ⁓2-39/64"
0.3120in. and 0.3125in.
1.0210in. and 1.0660in.
2.0520in. and 2.0720in.
0.3220in. and 0.3320in.
0.4320in. and 0.4370in.
1.2200in. and 1.3100in.
0.375in.
24
28.0 rockwell c race insert
58.0 rockwell c inner member
12.0 degree SELF-Alignment in either direction
plastic tetrafluoroethylene race liner
steel comp 4130 rod end body
steel comp 440c inner member
steel comp 410 race insert or steel comp 416 race insert
66 fed std single material response race insert
66 fed std single material response rod end body
66 fed std single material response inner member
cadmium rod end body
passivate inner member
passivate race insert
ball type
unf
Unf
Ball type
Steel comp 410 race insert or steel comp 416 race insert
Steel comp 440c inner member
Steel comp 4130 rod end body
Plastic tetrafluoroethylene race liner
24
Right-hand
3a
Schedule B number: 8483308055
nmfc 114820
Transmission shafts: bearing housings, plain shaft bearings with housing, rod end bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
unf thread series ball type passivate race insert surface treated 12.0 degree self-alignment in either direction 24 thread quantity per inch 0.3120" bore diameter 2.5625" overall length right-hand 3a thread class
1. | REMS10ATC12E9056 | Cage 3NPS1 |
2. | 77300 | Cage 09455 |
3. | TFM105F | Cage 77896 |
4. | 114CS112-2 | Cage 77272 |
5. | 114CS112-2 | Cage 81205 |
6. | REMS10ATC12E9056 | Cage 21335 |
Nothing similar to this part number was found in our inventory
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. it is used to carry a load and to reduce sliding friction. it does not employ rolling elements. the outer member of the assembly is modified to provide a shank. the inner member may be either a plain spherical bearing or a sleeve bearing. excludes bearing, plain, spherical and bearing, plain, self-aligning.