Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 01-827-04E-004 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
externally threaded
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
2.4380in. ⁓2-29/64"
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.
0.2495in. and 0.2500in.
0.9900in. and 1.0100in.
1.9070in. and 1.9690in.
0.2600in. and 0.2720in.
0.5880in. and 0.5930in.
1.2190in. and 1.3120in.
The limiting radial load which the item can carry at rest without permanent deformation of the stressed surface or the danger of fracture.
2270 pounds
The length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.375in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
55.0 rockwell c inner member and 62.0 rockwell c inner MEMBER28.0 rockwell c race insert and 37.0 rockwell c race INSERT36.0 rockwell c rod end body and 42.0 rockwell c rod end body
The feature inherent in the item design to effect lubrication.
SELF-Lubricating liner race liner
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
finish on ball optional
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 440c inner membersteel comp 630 race insertplastic polytetrafluoroethylene race liner and plastic polyamide race liner and plastic phenolic race linersteel comp 4130 rod end body or steel comp E4340 rod end body
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5630 assn std single material response inner memberams 5643 assn std single material response race INSERTMIL-B-81820 mil spec single material response race LINERMIL-S-6758 mil spec 1st material response rod end body or MIL-S-5000 mil spec 2nd material response rod end body
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate inner membercadmium rod end body and chromate rod end body
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response inner MEMBERQQ-P-416, type 2, class 2 fed spec single treatment response rod end body
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
ball type
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Ball type
Steel comp 440c inner membersteel comp 630 race insertplastic polytetrafluoroethylene race liner and plastic polyamide race liner and plastic phenolic race linersteel comp 4130 rod end body or steel comp e4340 rod end body
24
Right-hand
3a
Schedule B number: 8483308055
Transmission shafts: bearing housings, plain shaft bearings with housing, rod end bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
NSN 3120-01-343-2389 BEARING,PLAIN,ROD END
unjf thread series ball type passivate inner membercadmium rod end body surface treated finish on ball optional 24 thread quantity per inch 0.2495" bore diameter 2.4380" overall length right-hand 3a thread class
- NIIN
- 013432389
- NIIN Date
- 08/08/91
- Schedule B
- 8483308055
- Name Code
- 13209
- FIIG
- A045A0
- Item Weight
- 0.000lbs
- Item Dimensions
- QUP
- Historical Price
- $280.23 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | ARYT4EHJ | Cage 50294 |
| 2. | KBDE4-400 | Cage 97613 |
| 3. | 04A070-04 | Cage 76823 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for 01-827-04E-004 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
01-827-04E-004 / Bearing,plain,rod endWhat is the formal definition of this item?
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. it is used to carry a load and to reduce sliding friction. it does not employ rolling elements. the outer member of the assembly is modified to provide a shank. the inner member may be either a plain spherical bearing or a sleeve bearing. excludes bearing, plain, spherical and bearing, plain, self-aligning.
