NAS562-8FEE22A

NAS5628FEE22A Needle Bearing Cam Follower
Home » Catalog » Bearings (p. 825) » Needle Bearing Cam Followers (p. 4) » Part Number NAS562-8FEE22A

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. NAS562-8FEE22A specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.4220in. ⁓27/64"

Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

2.1100in. ⁓2-1/8"

Overall Outside Diameter
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.

1.1245in. and 1.1260in.

Lubrication Material
The element,compound,or mixture with which the item is lubricated.

grease

Stud Diameter
The length of a straight line which passes through the center of a stud,and terminates at the circumference.

0.4985in. and 0.5000in.

Outer Ring Width

0.6510in. and 0.6560in.

Stud Length
A measurement of the longest dimension of the stud,in distinction from width.

1.7810in. and 1.8280in.

Seal Quantity
The number of seals included on the item.

2

Bearing Seal Type
Indicates the type of seal provided with the bearing.

contact

Alignment Type
Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.

rigid

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

20

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.500in. ⁓1/2"

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

lubricator in flanged end of stud

Lubrication Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.

MIL-G-23827 mil spec single material response

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel end platesteel comp E52100 outer ringsteel comp E52100 rollerplastic acetal shell or plastic polyamide shellsteel comp E52100 stud

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

sae assn std single material response outer ringsae assn std single material response rollersae assn std single material response stud

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium end plate and chromate end platechromium outer ringcadmium stud and chromate stud

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, TY1, CL2 fed spec single treatment response end PLATEQQ-C-320, CL2 fed spec single treatment response outer RINGQQ-P-416, TY1, CL2 fed spec single treatment response stud

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

cam follower

Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

81349-MIL-I-6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

80205-NAS562 professional/industrial association standard

Answers.

What class is the thread series?

Unjf

What is the style?

Cam follower

What material is the needle bearing cam follower made of ?

Steel end platesteel comp e52100 outer ringsteel comp e52100 rollerplastic acetal shell or plastic polyamide shellsteel comp e52100 stud

What is the thread quantity per inch?

20

What is the thread length?

0.4220 inches

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for NAS562-8FEE22A?

3110-01-355-1001

How is this classified for shipping?

Schedule B number: 8482400000
Needle roller bearings

What's the federal classification of NAS562-8FEE22A?

FSC 3110 ⁓ Bearings, antifriction, unmounted

Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.

Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)

NSN 3110-01-355-1001 CAM FOLLOWER,NEEDLE BEARING

unjf thread series cam follower cadmium end plate surface treated lubricator in flanged end of stud 20 thread quantity per inch 2.1100" overall length 0.4220" thread length right-hand 3a thread class

NIIN
013551001
NIIN Date
03/11/92
Schedule B
8482400000 
Name Code
00040
FIIG
A044A0
QUP
 
Historical Price
$62.18 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Department of The Air Force 

Availability for NAS562-8FEE22A A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other cam followers with similar characteristics

Nothing similar to this part number was found in our inventory

NAS562-8FEE22A / Cam follower,needle bearingWhat is the formal definition of this item?

An assembly consisting of a roller and stud used to effect a rolling contact with a cam, and convert the reciprocating or oscillating motion to linear motion.