Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS562-3R18G specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.7500in. ⁓1-3/4"
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.
0.4995in. and 0.5010in.
The element,compound,or mixture with which the item is lubricated.
grease
The length of a straight line which passes through the center of a stud,and terminates at the circumference.
0.1885in. and 0.1900in.
0.2760in. and 0.2810in.
A measurement of the longest dimension of the stud,in distinction from width.
1.4530in. and 1.5000in.
The number of seals included on the item.
2
Indicates the type of seal provided with the bearing.
contact
Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.
rigid
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
A designation that is used for the purpose of general identification of the thread.
0.190in. ⁓13/64"
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.
afbma std tolerance for can follwer needle bearing
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
cotter pin hole in threaded end of stud, 0.100 in. from stud end, 0.070 in. dia, no lubricator fitting
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.
MIL-G-81322 mil spec single material response
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E52100 outer race
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E52100 roller
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E52100 stud
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel end plate
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
Q-P-416, ty 1, cl 2 fed spec single treatment response
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
cam follower
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Cam follower
Steel end plate
Steel comp e52100 stud
Steel comp e52100 roller
Steel comp e52100 outer race
32
Right-hand
3a
Schedule B number: 8482400000
Needle roller bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-01-230-4897 CAM FOLLOWER,NEEDLE BEARING
unjf thread series cam follower cadmium surface treated cotter pin hole in threaded end of stud, 0.100 in. from stud end, 0.070 in. dia, no lubricator fitting 32 thread quantity per inch 1.7500" overall length right-hand 3a thread class
- NIIN
- 012304897
- NIIN Date
- 04/14/86
- Schedule B
- 8482400000
- Name Code
- 00040
- FIIG
- A044A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Availability for NAS562-3R18G A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other cam followers with similar characteristics
Nothing similar to this part number was found in our inventory
NAS562-3R18G / Cam follower,needle bearingWhat is the formal definition of this item?
An assembly consisting of a roller and stud used to effect a rolling contact with a cam, and convert the reciprocating or oscillating motion to linear motion.
