NAS562-3FEE1 Needle Bearing Cam Follower

Datasheet. NAS562-3FEE1 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.3440in. ⁓11/32"

Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

0.6875in. ⁓45/64"

Overall Outside Diameter
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.

0.4995in. and 0.5010in.

Lubrication Material
The element,compound,or mixture with which the item is lubricated.

grease

Stud Diameter
The length of a straight line which passes through the center of a stud,and terminates at the circumference.

0.1885in. and 0.1900in.

Outer Ring Width

0.2760in. and 0.2810in.

Stud Length
A measurement of the longest dimension of the stud,in distinction from width.

0.4065in.

Seal Quantity
The number of seals included on the item.

Bearing Seal Type
Indicates the type of seal provided with the bearing.

contact

Alignment Type
Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.

rigid

Internal Fit-up Designation
The designation specifying the type of fit as recognized by industrial and governmental agencies.

standard

Features Provided
Those features,not otherwise specified,which may be required for proper functioning of the item.

flush lubrication fitting

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.190in. ⁓13/64"

Standard Tolerance Designation
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.

afbma std tolerance for can follwer needle bearing

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

plating on exposed surfaces only; cotter pin hole in stud 0.070 in. dia nom, 0.100 in. from stud end

Lubrication Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.

MIL-G-23827 mil spec single material response

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

plastic polyamide seal

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E52100 outer ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E52100 roller

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E52100 stud

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel end plate

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

sae assn std single material response outer ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

sae assn std single material response roller

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

sae assn std single material response stud

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium stud

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

chromium outer ring

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium end plate

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-C-320, class 2 fed spec single treatment response outer ring

QQ-P-416, type 1, class 2 fed spec single treatment response end plate

QQ-P-416, type 1, class 2 fed spec single treatment response stud

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

cam follower

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

80205-NAS562 professional/industrial association standard

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unjf

What is the style?

Cam follower