HTR207-11

HTR20711 Needle Bearing Cam Follower
Home » Catalog » Bearings (p. 896) » Needle Bearing Cam Followers (p. 5) » Part Number HTR207-11

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. HTR207-11 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.7020in. and 0.7180in. ⁓23/32"

Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

2.0290in. and 2.0590in. ⁓2-1/16"

Overall Outside Diameter
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.

1.2495in. and 1.2510in.

Stud Diameter
The length of a straight line which passes through the center of a stud,and terminates at the circumference.

0.5000in. and 0.5015in.

Outer Ring Width

0.7450in. and 0.7500in.

Stud Length
A measurement of the longest dimension of the stud,in distinction from width.

1.2840in. and 1.3090in.

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

20

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.5000in. ⁓1/2"

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

polytetrafluoroethylene fabric SELF-Lubricating liner bonded to race i.d. and faces

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 440c outer race

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 630 end plate

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 630 stud

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5630 assn std single material response outer race

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5643 assn std single material response end plate

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5643 assn std single material response stud

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate end plate

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate outer race

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate stud

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response end plate

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response outer race

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response stud

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

cam follower

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unf

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unf

What is the style?

Cam follower

What material is the needle bearing cam follower made of ?

Steel comp 630 stud

What material is the needle bearing cam follower made of ?

Steel comp 630 end plate

What material is the needle bearing cam follower made of ?

Steel comp 440c outer race

What is the thread quantity per inch?

20

What is the thread length?

0.7020 inches minimum and 0.7180 inches maximum

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for HTR207-11?

3110-01-338-1039

How is this classified for shipping?

Schedule B number: 8482400000
nmfc 114800
Needle roller bearings

What's the federal classification of HTR207-11?

FSC 3110 ⁓ Bearings, antifriction, unmounted

Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.

Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)

NSN 3110-01-338-1039 CAM FOLLOWER,NEEDLE BEARING

unf thread series cam follower passivate stud surface treated polytetrafluoroethylene fabric self-lubricating liner bonded to race i.d. 20 thread quantity per inch 2.0290" overall length 0.7020" thread length right-hand 3a thread class

NIIN
013381039
NIIN Date
04/26/91
Schedule B
8482400000 
Name Code
00040
FIIG
A044A0
QUP
1 
Historical Price
$160.13 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. 510-13411-11 Cage 82918

Major End Users Countries and entities

  • - Department of The Navy 

Availability for HTR207-11 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
Rating variable 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing 
Commodity (for shipments via water)
Bearings 
NMFC (national motor freight code)
114800 BEARING,ROLLER,THRUST 
UFC (universal freight code)
58850 

Similar by Design Other cam followers with similar characteristics

Nothing similar to this part number was found in our inventory

HTR207-11 / Cam follower,needle bearingWhat is the formal definition of this item?

An assembly consisting of a roller and stud used to effect a rolling contact with a cam, and convert the reciprocating or oscillating motion to linear motion.