1SE7912

1SE7912 Needle Bearing Cam Follower

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 1SE7912 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

2a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.5000in. ⁓1/2"

Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

1.6260in. and 1.6980in. ⁓1-45/64"

Overall Outside Diameter
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.

1.1245in. and 1.1280in.

Lubrication Material
The element,compound,or mixture with which the item is lubricated.

grease

Stud Diameter
The length of a straight line which passes through the center of a stud,and terminates at the circumference.

0.4375in.

Outer Ring Width

0.6200in. and 0.6250in.

Stud Length
A measurement of the longest dimension of the stud,in distinction from width.

0.9840in. and 1.0310in.

Seal Quantity
The number of seals included on the item.

2

Bearing Seal Type
Indicates the type of seal provided with the bearing.

contact

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

20

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.438in. ⁓29/64"

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

eccentric bushing 0.6240in. dia min 0.6260 in. dia max by 0.5000 in.lg located 0.5000 in.from end of stud 0.0300 in.min 0.0330 in. max above center

Lubrication Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.

MIL-G-23827 mil spec single material response

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

iron alloy sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

plastic polyhexamethylene amide seal or plastic polycaprolactam seal

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E52100 inner race or steel comp E50100 inner race

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E52100 outer race or steel comp E50100 outer race

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E52100 roller or steel comp E50100 roller

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E52100 stud or steel comp E50100 stud

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std all material responses inner race or sae assn std all material responses inner race or aisi assn std all material responses inner race

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std all material responses outer race or sae assn std all material responses outer race or aisi assn std all material responses outer race

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std all material responses roller or sae assn std all material responses roller or aisi assn std all material responses roller

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std all material responses stud or sae assn std all material responses stud or aisi assn std all material responses stud

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-B-5687, ty 2, comp A1 mil spec single material response sleeve

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-M-20693 mil spec single material response seal

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium exposed surfaces as mounted or cadmium exposed surfaces as mounted and chromate exposed surfaces as mounted

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, ty 1, cl 2 fed spec 1st treatment response exposed surfaces as mounted or QQ-P-416, ty 1, cl 3 fed spec 2nd treatment response exposed surfaces as mounted

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

cam follower

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unf

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unf

What is the style?

Cam follower

What material is the needle bearing cam follower made of ?

Steel comp e52100 stud or steel comp e50100 stud

What material is the needle bearing cam follower made of ?

Steel comp e52100 roller or steel comp e50100 roller

What material is the needle bearing cam follower made of ?

Steel comp e52100 outer race or steel comp e50100 outer race

What material is the needle bearing cam follower made of ?

Steel comp e52100 inner race or steel comp e50100 inner race

What material is the needle bearing cam follower made of ?

Plastic polyhexamethylene amide seal or plastic polycaprolactam seal

What material is the needle bearing cam follower made of ?

Iron alloy sleeve

What is the thread quantity per inch?

20

What is the thread length?

0.5000 inches

What is the thread direction?

Right-hand

What is the thread class?

2a

What is the NSN for 1SE7912?

3110-00-007-0118

How is this classified for shipping?

Schedule B number: 8482400000
nmfc 114820
Needle roller bearings

What's the federal classification of 1SE7912?

FSC 3110 ⁓ Bearings, antifriction, unmounted

Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.

Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)

NSN 3110-00-007-0118 CAM FOLLOWER,NEEDLE BEARING

unf thread series cam follower cadmium exposed surfaces as mounted or cadmium exposed surfaces as mounted surface treated eccentric bushing 0.6240in. dia min 0.6260 in. dia max by 0.5000 in.lg located 0.5000 in.from end of stud 0.0300 in.min 0.0330 in. max above center 20 thread quantity per inch 1.6260" overall length 0.5000" thread length right-hand 2a thread class

NIIN
000070118
NIIN Date
06/30/72
Schedule B
8482400000 
Name Code
00040
FIIG
A044A0
Item Weight
0.200lbs
Item Dimensions
--
QUP
Historical Price
$95.83 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. CF2346 Cage 92563
2. 901776-1D Cage 92563
3. 901776-1D Cage 51588
4. 901776-1D Cage 60380
5. 901776-1D Cage 82577
6. 901776-1D Cage 39317

Major End Users Countries and entities

  • - Department of The Air Force 
  • - Netherlands 

Availability for 1SE7912 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
77.5 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing 
Commodity (for shipments via water)
Bearings 
NMFC (national motor freight code)
114820 BEARINGS/BUSHINGS NOI BALL/ROLLER 
UFC (universal freight code)
58860 

Similar by Design Other cam followers with similar characteristics

Nothing similar to this part number was found in our inventory

1SE7912 / Cam follower,needle bearingWhat is the formal definition of this item?

An assembly consisting of a roller and stud used to effect a rolling contact with a cam, and convert the reciprocating or oscillating motion to linear motion.