Serving our customers with quality and safety first.
0.542in. and 0.557in.
1.7500in.
0.750in.
4.500in.
3.120in.
5.750in.
pipe plug
1.376in.
1.500in.
open
1.625in.
45.0 degrees
round, unthreaded
32.0 microin finish on bore; internal flange 1.750 in. dia, 0.136 in. wide, 1.157 in. from front face; reduced dia bore same end as internal flange to 1.871 in. dia, 0.207 in. deep from back face; four equally spaced holes in from fsace, 0.380 in. min deep, 0.250 in. 20UNC-2B threads, 2.124 in. apart; 0.3138 dia by 0.380 in. deep hole in base
steel comp 303se
astm A582 assn std single material response
cadmium bore
paint housing excluding bore
find no. 4, fscm 49956 mfr ref single treatment response bore
find no. 7, fscm 49956 mfr ref single treatment response housing excluding bore
pillow block, solid
1EA
Pillow block, solid
Steel comp 303se
Schedule B number: 8482991050
nmfc 123070
Parts, except inner and outer races, for ball bearings, (including ball bearings with integral shafts)
FSC 3130 ⁓ Bearings, mounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding antifriction bearings (fsc 3110); plain unmounted bearings (fsc 3120).
pillow block, solid paint housing excluding bore surface treated 32.0 microin finish on bore; internal flange 1.750 in. dia, 0.136 in. wide, 1.157 in. from front face; reduced dia bore same end as internal flange to 1.871 in. dia, 0.207 in. deep from back face; four equally spaced holes in from fsace, 0.380 in. min deep, 0.250 in. 20unc-2b threads, 2.124 in. apart; 0.3138 dia by 0.380 in. deep hole in base 1.7500" bore diameter
Nothing similar to this part number was found in our inventory
A single or multiple piece item without ball, plain or roller bearing(s). it is designed to meet various or specific conditions of mounting. for items with bearings, see bearing unit, ball; bearing unit, plain; and bearing unit, roller.