Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 751680-1-1 specification
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.
2.5840in.
A measurement of the smallest dimension of a flange,in distinction from length or width.
0.0600in. and 0.0700in.
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.
0.2170in. and 0.2240in.
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.
1.8508in. and 1.8511in.
A measurement of the longest dimension of the housing,in distinction from width.
2.1650in.
A measurement taken at right angles to the length of a housing,in distinction from thickness.
2.4100in.
Indicates the type of shaft end provided.
open
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
spacer, sleeve, part 751680-20, 0.330 in. long, 1.686 id inserted in bore of housing 0.912 in. from dlanged end corner, held in place by pin, straight, headless, part 69522-6C6 in three equally spaced places; two 0.1005 in. dia holes through body on each side of one dowel pin hole
Answers.
1EA
Schedule B number: 8482991050
nmfc 114820
Parts, except inner and outer races, for ball bearings, (including ball bearings with integral shafts)
FSC 3130 ⁓ Bearings, mounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding antifriction bearings (fsc 3110); plain unmounted bearings (fsc 3120).
NSN 3130-01-208-3899 HOUSING,BEARING UNIT
spacer, sleeve, part 751680-20, 0.330 in. long, 1.686 id inserted in bore of housing 0.912 in. from dlanged end corner, held in place by pin, straight, headless, part 69522-6C6 in three equally spaced places; two 0.1005 in. dia holes through body on each side of one dowel pin hole 2.1650" housing length 1.8508" bore diameter
- NIIN
- 012083899
- NIIN Date
- 05/13/85
- Schedule B
- 8482991050
- Name Code
- 30559
- FIIG
- A093A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $2,128.65 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Air Force
Availability for 751680-1-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other housings with similar characteristics
Nothing similar to this part number was found in our inventory
751680-1-1 / Housing,bearing unitWhat is the formal definition of this item?
A single or multiple piece item without ball, plain or roller bearing(s). it is designed to meet various or specific conditions of mounting. for items with bearings, see bearing unit, ball; bearing unit, plain; and bearing unit, roller.
