Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 1244578-1 specification
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
0.8750in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
0.3120in.
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.
0.4380in. and 0.4390in.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
used on a reducer assembly
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 1018
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ASTM-A108, grade 1018 assn std single material response
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
bearing
Answers.
1EA
Bearing
Steel comp 1018
0.3120 inches
0.8750 inches
Schedule B number: 8482991050
nmfc 114820
Parts, except inner and outer races, for ball bearings, (including ball bearings with integral shafts)
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-01-271-2688 COLLAR,BEARING
bearing used on a reducer assembly 0.4380" bore diameter 0.3120" overall width 0.8750" outside diameter
- NIIN
- 012712688
- NIIN Date
- 01/22/88
- Schedule B
- 8482991050
- Name Code
- 30215
- FIIG
- A044A0
- QUP
- 1
- Historical Price
- $37.25 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Air Force
Availability for 1244578-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other collars with similar characteristics
Nothing similar to this part number was found in our inventory
1244578-1 / Collar,bearingWhat is the formal definition of this item?
A retaining ring mounted on a shaft with setscrew, key or pin, specifically designed for the purpose of locating and positioning a bearing. for general purpose shaft collars, see collar, shaft. excludes bearing washer, thrust; and bearing, sleeve.
